Darkness7

Wow... this seems like a lot of money and fuss just to get a flush clean look. Just buy an emblem that will cover the holes. There are numerous people/threads on here that talk about differ emblems that will fit over the holes. I personally have the "hurst equipped" emblem and it covers the two holes perfectly...takes alil patience to line it up.

cobra443

This is how I solved the issue:

Before:


After:

Darkness7

I finally ran down the thread that helped me out. Here ya go:

https://mustangforums.com/forum/2005-2014-mustangs/355855-s197-fender-badge-how-to-pics-and-hole-measurements.html

MadCowRacer

I want to see these black emblems. Hell I may pull mine off this weekend and do it. The hood, rear decklid spoiler, and chin spoiler are all satin black on my car. Doing the emblems may be a real kicker.

Balys

Im getting them painted next week. I'll post some pics when its done.

MadCowRacer

Hell try to rattle can them this weekend. Use fishing line to cut the two sided tape and then pull out the emblems. If your going to get them professionally sprayed anyway you can't really screw up too badly. You might just save yourself some coin.

J2Stang

My 07 GT/CS has no such holes

SaddleUp

Debadging sucks.

Leave that little "GT" in place.