3D Carbon Tonneau cover
02-26-2009, 04:39 PM
#1
3D Carbon Tonneau cover
Bagged one of the hardshell 3D Carbon Tonneau covers on eBay last week (wanted one forever, but $400 list + $100 shipping? Sheesh...) now at $150, well, that's a different story 
It conveniently arrived on a rare Feb day in NE warm enough to put the top down and try it
I'll probably give it a spray with the matte black urethane I used on my rear spoiler (as it it's a match for the seating "charcoal" color)
It conveniently arrived on a rare Feb day in NE warm enough to put the top down and try it
I'll probably give it a spray with the matte black urethane I used on my rear spoiler (as it it's a match for the seating "charcoal" color)
Last edited by Torch_Vert; 02-26-2009 at 04:42 PM.
02-26-2009, 09:32 PM
#7
02-27-2009, 06:32 AM
#10
There are two small metal receiver plates for the locks which simply push unto the existing trim for the top well on either side, and the back is secured with a pair of flexible tabs on the cover that slip between the top and the rear of the well.
Another thing I like it that there's a soft rubber gasket all the way around the bottom edge, and when installed, this rides up on the existing plastic trim around the well, not on the paint where dirt/grit could get trapped and scratch up the paint finish.
Last edited by Torch_Vert; 02-27-2009 at 06:35 AM.