Superstripe is on!!
#11
Looks really good......I like your planned look as well, boy, a shaker or Roush hood scoop integrated into that flat stripe would really set it off, the contrast of the red paint and flat black is neat. The magnum 500 style wheels look sharp as well......good luck with it.
Mike
Mike
#13
^^ planning on just the hood. i like whole superstripe look, but since i'm going for the 'boss/mach' retro look, i'm just sticking with the hood stripe.
i've also been thinking about either a hood scoop or the shaker system too, but either one will have to wait for now.
i've also been thinking about either a hood scoop or the shaker system too, but either one will have to wait for now.
Last edited by Xeno; 09-09-2009 at 11:11 PM.
#17
it did have transfer tape, but i did not get any instructions; it was fairly straight forward to install, though. there were holes in the transfer tape cut out where you place it over the washer nozzles (so you know what end was what right off the bat), and with the stripe install instructions courtesy of the great tacobill, the install went fairly smooth. it was a little difficult to get the front end of the stripe to lay right (thanks to our curved hoods), and i did have to cut the center section at the very front of the hood where it curves down to get that section to lay right, but other than that i didn't have any problems... oh, having a buddy help is a good idea too since it was such a large piece
#19
that's going to look awesome!