Sidmonster

Does anyone know where I can get the emblem that is in the center of the drivers airbag? Mine is scratched and I want to replace it. Does anyone perhaps have access to a deployed airbag where the emblem is still in good shape like the one shown here?

usc49erfan

a junkyard is the only place i could think off, could not find a site that sold them besides saleen http://www.saleen.com/SC101_Services...0-9100-B15616*

Hootna

http://www.fnsweet.com/forums/05-09-...el-emblem.html

warnen

This is what I did. Used a website that makes center caps, making it digital or something like that

TinPony

will you share the site you got the GT center cap from?

warnen

http://www.makingitdigital.net/store1/agora.cgi

I forget the size but if you do a search there are posting saying it.

1BADD05

How much was it? also does it replace your original cap? or just go over the top of the old one? how do you remove the old one, without interfering with the airbag?

warnen

$23 for 4 of them. I took off my orginal 1st but I guess you can put it over it but it will sick out kinda far. I used a small screw driver to pry up the little tabs on the old emblem, just go slow and it won't hurt the airbag. Then I trimed the rubber fins behind the emblem so I had a flat area to glue the new one on to. Added a bit of extra glue and its been on for almost 3 years now.

KoolerSL2

now thats different, i kinda like it!

codeglia1

I tried removing my center cap as you did, and thought it should be noted that by doing so, you will destroy the original cap and it cannot ever be put back on again. This is due to the way the metal tabs are bent around and behind the airbag cover during manufacturing.