Help with footwell lighting
#1
Help with footwell lighting
So I have Ben looking everywhere and can't find anything on how to do this. I wanna make my footsteps have blue LEDs. Most everywhere I look talks bout installing them so they come on when u lock and unlock car. However I Wanna just have mine hooked to a toggle switch on the drivers side that controls both driver and passenger footwells so I can turn them off and on at my own will. Where can I splice into for this? Any suggestions how to do this?
Notes: first I have blue led cup holder lights as well as seat warmers. So don't want on center councle. Also spliced into most wires there alot already.
Car is a 2005 v6 mustang
Notes: first I have blue led cup holder lights as well as seat warmers. So don't want on center councle. Also spliced into most wires there alot already.
Car is a 2005 v6 mustang
#2
You want them in your floorwells? Or on the door panel,
kindahard to tell from your post.
But anyways, mounting is a breeze.
I'd just splice into the radio HU (even if you don't want to splice into the center console, it won't hurt anything really..)
kindahard to tell from your post.
But anyways, mounting is a breeze.
I'd just splice into the radio HU (even if you don't want to splice into the center console, it won't hurt anything really..)
#4
Mine are wired to the leads going up the A pillar to the courtesy lights, they operated just the same as the courtesy lights. the footweels lightup when I open the door or when i push the overhead switch... in other words they work just like the factory lights.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
lincolnshibuya
V6 (1994-2004) Mustangs
9
12-08-2015 04:37 PM