Glossy shine
#22
Give it a try...get a Cal. duster...bunch of microfibers...and I use Meguires Quick Wax and Ultimate Detailer...you will be amazed how smooth and glossy the paint gets after continued wipedowns...the 15 mins it takes to go over my car each time beats the hell out of washing...drying and waxing...
Last edited by Lifter583; 11-10-2011 at 02:37 PM.
#24
here is my paint
I have orange peel but I am not going to wet sand my car because its not that noticeable.
My paint looks this way after countless hours with my buffer buffing it out and finishing out the paint with different stages of polish and pads. Also only letting top quality MF towels touch my paint as to not induce any swirls from cheap towels. There is ALOT and time and effort into making paint perfect. Notice how ZERO swirls show up in the sun reflection.
The things I have used on my car are consist of whats in my detail cabinet..this is an older pic and the amount of products has grown.
I sold my Flex 3401 and my Porter Cable 7424 and bought a Griots 6" buffer..I had no use for the Flex anymore because with the 7/8" Hydrotech pads and the Microfiber pads did everything I need.
I have orange peel but I am not going to wet sand my car because its not that noticeable.
My paint looks this way after countless hours with my buffer buffing it out and finishing out the paint with different stages of polish and pads. Also only letting top quality MF towels touch my paint as to not induce any swirls from cheap towels. There is ALOT and time and effort into making paint perfect. Notice how ZERO swirls show up in the sun reflection.
The things I have used on my car are consist of whats in my detail cabinet..this is an older pic and the amount of products has grown.
I sold my Flex 3401 and my Porter Cable 7424 and bought a Griots 6" buffer..I had no use for the Flex anymore because with the 7/8" Hydrotech pads and the Microfiber pads did everything I need.
#25
I finally just broke down and invested in some things (see link below)
http://www.autogeek.net/xmtpocainswr.html
...and when I say finally, they will be delivering today, lol!!
I plan on spending many hours on my car, get it looking like 05xrunner's.....car looks amazing!
http://www.autogeek.net/xmtpocainswr.html
...and when I say finally, they will be delivering today, lol!!
I plan on spending many hours on my car, get it looking like 05xrunner's.....car looks amazing!
#26
I go over my cars with lights all the time and have very few swirls...just have to go over it with light pressure and make sure all dust is off first... and the once a yr buffing takes care of the few swirls...Redfire does have an awesome look!..
#27
I finally just broke down and invested in some things (see link below)
http://www.autogeek.net/xmtpocainswr.html
...and when I say finally, they will be delivering today, lol!!
I plan on spending many hours on my car, get it looking like 05xrunner's.....car looks amazing!
http://www.autogeek.net/xmtpocainswr.html
...and when I say finally, they will be delivering today, lol!!
I plan on spending many hours on my car, get it looking like 05xrunner's.....car looks amazing!
#28
I say invest in some Hydrotech 7/8" low profile 5.5" buffing pads..get a tangerine and a Crimson..you can use the tangerine pad with intermediate swirl polish to remove most of the defects...then you can use the ultra fine with the crimson to remove any micromarring and really bring out the gloss..The 5.5" pads are much more effective on the PC vs the 6.5" pads because of the power of the PC 6.5" pads are not the best for any of the traditional DA's they will work sure but it will take more time and little more technique. Also the MF pads from meguiars and the new Optimum MF are great.
Thread
Thread Starter
Forum
Replies
Last Post
Diode Dynamics
Vendor For Sale / Group Buy Classifieds
28
05-26-2022 12:02 PM
xbmx89
Texas Regional Chapter
1
11-10-2015 10:43 PM