Eleanor Grille for the S197?
#1
Eleanor Grille for the S197?
Anybody have thoughts on the narrowed Eleanor grille fog lights versus the stock GT wider ones with the pony centered? I don't know if I want to change something that I really like... thanx
#4
I am interested in doing the same mod with my V6 pony edition and am getting mixed information about whether I need a wiring harness to hook up the GT fog lamps. AM says I need the wiring harness because the lamp connectors will not fit from the pony style lamps to the GT lamps. Then I read that I only need a pigtail to connect the lamps. Can someone clarify what I may need to do this mod? I will be purchasing the grille from Street Scene and I can purchase the complete kit with the lamps and wiring harness but don't want to spend unnecessary dollars since I am going to purchase a set of wheels and tires before the spring.
#5
You need the 'adapters' to go from the H10 PP fogs to the 9145 GT bulb...
I put a 99-04 mustang fender badge running
horse on a V6 StreetScene Eleanor Grill.
The badges are smaller than the 05-09 fender badges.
I got it off of eBay...
99-04 fender emblems
DRIVERS SIDE 6R3Z-16228-B
YR3Z-16098-BB
I used some 3M VHB Emblem tape to install it.
horse on a V6 StreetScene Eleanor Grill.
The badges are smaller than the 05-09 fender badges.
I got it off of eBay...
99-04 fender emblems
DRIVERS SIDE 6R3Z-16228-B
YR3Z-16098-BB
I used some 3M VHB Emblem tape to install it.
Last edited by 157dB; 02-15-2014 at 08:52 AM.
#8
This is what I found for the pigtail:
http://www.starkey-products.com/
V6 MUSTANG FOG LIGHT CONVERTERS H11 TO H10 SET (2005-2012)
This set of fog light wire converters are for Mustang V6 owners who convert from a V6 Pony Package grille to a GT style grille. This set will allow you to convert your factory wires from H11 connectors (used for V6 Pony Package fog lamps) to H10 connectors (used on most GT style fog lamps). Two converters with high quality, weatherproof connectors are included for a plug-and-play installation.
If your V6 came with fog lamps from the factory and you upgraded to a GT-style grille with fog lamps (which use H10 bulbs) this is all you need to connect your new fog lamps.
Would this work?
http://www.starkey-products.com/
V6 MUSTANG FOG LIGHT CONVERTERS H11 TO H10 SET (2005-2012)
This set of fog light wire converters are for Mustang V6 owners who convert from a V6 Pony Package grille to a GT style grille. This set will allow you to convert your factory wires from H11 connectors (used for V6 Pony Package fog lamps) to H10 connectors (used on most GT style fog lamps). Two converters with high quality, weatherproof connectors are included for a plug-and-play installation.
If your V6 came with fog lamps from the factory and you upgraded to a GT-style grille with fog lamps (which use H10 bulbs) this is all you need to connect your new fog lamps.
Would this work?