Cobra crank with an auto
03-07-2006, 04:01 AM
Thread Starter
Join Date: Feb 2006
Posts: 44
Cobra crank with an auto
Is it possible to run the Cobra crank with an auto trans? What mods would be needed?
Different balance? Does anyone make a forged crank for our cars that actually fits the stock equipment?
03-07-2006, 10:43 AM
Join Date: Feb 2006
Posts: 38
RE: Cobra crank with an auto
It shouldn't be too hard to have a machine shop mate your flex plate to a Cobra crank. I had that done with my built short block out of an LSC.
03-07-2006, 11:20 AM
3rd Gear Member
Join Date: Jun 2005
Location: Nebraska
Posts: 510
RE: Cobra crank with an auto
Stock crank is 6 bolt and the Cobra crank is an 8 bolt. You will also need to replace the flywheel.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
svfetter
5.0L (1979-1995) Mustang
9
10-05-2015 11:39 AM
88 orangepeel notch
Street/Strip
4
10-05-2015 09:03 AM
fastbackford351
Classic Mustangs (Tech)
3
10-01-2015 12:24 PM
wraith777
General Tech
1
09-28-2015 10:49 AM
2poor4u2
V6 (1994-2004) Mustangs
1
09-26-2015 11:08 AM
03 ,
98 ,
99 ,
auto ,
balance ,
cobra ,
crank ,
crankshaft ,
forum ,
mustang ,
repair ,
stock ,
trans