Whine Noise - MustangForums.com



2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.

Reply
 
 
 
Thread Tools Search this Thread
Old 04-22-2006, 02:56 PM   #1  
RStone13
1st Gear Member
Thread Starter
 
Join Date: Mar 2006
Location: Western Ma
Posts: 106
Default Whine Noise

Ok I know I saw this question before but I don't remember the outcome. I have a 1,000 mi on my car and just started to notice a slight whineing noise when I let off the gas. I'm thinking it might becoming from the rear. Maybe rear-end? or trany? not sure. I have an auto if that matters. Any help will be appreaciated. Thanks in advance Bruce
RStone13 is offline   Reply With Quote
Old 04-22-2006, 09:22 PM   #2  
snogoldi
1st Gear Member
 
Join Date: Jan 2006
Location:
Posts: 118
Default RE: Whine Noise

2006 V6 Pony Package 3000 miles
I to have noticed a whining noise from the rear end of the car when I’m on the freeway going approximately 50 to 60mi. an hour. It happens when I just barely accelerate to keep the car at a constant speed. It seems to be louder when I’m pressing the accelerator very lightly and then subsides when I lift my foot off the accelerator.
snogoldi is offline   Reply With Quote
Old 04-22-2006, 09:56 PM   #3  
LesteR723
5th Gear Member
 
Join Date: Sep 2005
Location:
Posts: 2,486
Default RE: Whine Noise

your significant other had a team of specialists come in and install a supercharger on your car overnight. Be happy! loll jk

i have no clue... Good luck though!
LesteR723 is offline   Reply With Quote
Old 04-22-2006, 10:43 PM   #4  
grasshopper
2nd Gear Member
 
Join Date: Feb 2006
Location: Peoria, AZ
Posts: 382
Default RE: Whine Noise

Most likely it's just the way of the universe. Stronger means noisier. There's the off chance that it is a problem, but I'd bet money your just hearing the durability.
grasshopper is offline   Reply With Quote
Old 04-22-2006, 11:00 PM   #5  
spyder7724
4th Gear Member
 
Join Date: Oct 2005
Location:
Posts: 1,189
Default RE: Whine Noise

ford has an issue with the entire drivetrain making noise on these cars. i recall some guys having to replace driveshafts, trans mount and rear diff assy's. i have the same problem after i changed gears. i've had the rear apart 3 times and replaced the gears again but have the same problem still. some say that theirs gets better with more mileage on the new gears but mine is getting worse. my stock gear made zero noise even with the aluminum driveshaft.
i talked to the ford racing techs on tuesday and they told me that 3.31,3.55,3.73 were the worst ratios for making noise due to the tooth count and pitch of the teeth. that is why the new frpp gears have a different pitch and backcut ring gears. i also talked to the guys at JPC and they told me that despite the measurments they(05-upGT) use much less shim on the pinion than other 8.8's do especially in autos.
my guesss is that it's your gears and the best advise i can give for you is to buy a set of frpp 3.73's 4.10's 4.30's and go to the dealer and have them install under the warranty. they won't warranty the new gears but at least you can get the install of the new lower gears for free since they have to trash your stockers anyway. hoefully then you can get rid of the whine and step up in gear at the same time.
spyder7724 is offline   Reply With Quote
Old 04-23-2006, 10:57 AM   #6  
LesteR723
5th Gear Member
 
Join Date: Sep 2005
Location:
Posts: 2,486
Default RE: Whine Noise

Quote:
ORIGINAL: spyder7724

ford has an issue with the entire drivetrain making noise on these cars. i recall some guys having to replace driveshafts, trans mount and rear diff assy's. i have the same problem after i changed gears. i've had the rear apart 3 times and replaced the gears again but have the same problem still. some say that theirs gets better with more mileage on the new gears but mine is getting worse. my stock gear made zero noise even with the aluminum driveshaft.
i talked to the ford racing techs on tuesday and they told me that 3.31,3.55,3.73 were the worst ratios for making noise due to the tooth count and pitch of the teeth. that is why the new frpp gears have a different pitch and backcut ring gears. i also talked to the guys at JPC and they told me that despite the measurments they(05-upGT) use much less shim on the pinion than other 8.8's do especially in autos.
my guesss is that it's your gears and the best advise i can give for you is to buy a set of frpp 3.73's 4.10's 4.30's and go to the dealer and have them install under the warranty. they won't warranty the new gears but at least you can get the install of the new lower gears for free since they have to trash your stockers anyway. hoefully then you can get rid of the whine and step up in gear at the same time.
i'v heard of this before, guys said taht if you have certain gears they will whine and make noise, but the FRPP ones dont, even though they cost more---
LesteR723 is offline   Reply With Quote
Old 04-23-2006, 11:14 AM   #7  
Stroken97
1st Gear Member
 
Join Date: Feb 2006
Location:
Posts: 90
Default RE: Whine Noise

If it only happens when you let off the gas most likely it is the ring/pinion gears. Take it in to Ford and don't let them tell you all Mustangs have rear end noise. The ring and pinion was not set up correctly at the factory. I had the same issue and they replaced them.
Stroken97 is offline   Reply With Quote
Old 04-23-2006, 01:48 PM   #8  
STANGT
1st Gear Member
 
Join Date: Mar 2006
Location:
Posts: 52
Default RE: Whine Noise

RSTONE13,

I've worked as an automotive engineer for over 15 years on drivetrain in Detroit. Most of my experience is in front & rear axles. I designed & released the F-body (camaro & firebird) axle back in 93'.

Anyways, what you have (by your description) is what they call "coast side" ring & pinion noise. Not a big deal mechanically, but it can become very irritating to the ear. You need the dealership to re-shim the ring & pinion in your rear axle or have them put in a new set & shim correctly. The ring & pinions are lapped as a set and shimmed to a proper backlash. Yours was not done correctly at the factory in Sterling Heights, MI.

Tell the dealer to fix it. It's a common problem in axle manufacturing. The dealer will know about exactly what I've written here. They have seen your problem a hundred times I'm sure......

STANGT
STANGT is offline   Reply With Quote
Old 04-23-2006, 05:28 PM   #9  
RStone13
1st Gear Member
Thread Starter
 
Join Date: Mar 2006
Location: Western Ma
Posts: 106
Default RE: Whine Noise

bump
RStone13 is offline   Reply With Quote
Old 04-24-2006, 02:26 PM   #10  
RStone13
1st Gear Member
Thread Starter
 
Join Date: Mar 2006
Location: Western Ma
Posts: 106
Default RE: Whine Noise

Bump Again
RStone13 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Loud Noise Above 30 MPH bjdutch2005 2005-2014 Mustangs 10 03-24-2017 03:38 AM
What other parts should I be concerned about if my pinion bearing went bad? KingRando 2005-2014 Mustangs 5 10-02-2015 08:06 AM
What is this terrible sound coming from my rear axle? KingRando 2005-2014 Mustangs 22 10-01-2015 11:16 AM
Engine Knock 69Volunteer Classic Mustang General Discussion 1 09-30-2015 10:39 AM
High Pitch Whine. Help? FivePointToTheOh 2005-2014 Mustangs 9 09-29-2015 12:53 PM


Tags
2005, 88, end, gas, gt, mustang, noise, noises, rear, rearend, sound, v6, whine, whining, whoop

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising
Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 12:24 AM.


© 2018 MH Sub I, LLC dba Internet Brands
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.