Where are the correct Jacking points on the sides just rear of the front tires?
#1
Where are the correct Jacking points on the sides just rear of the front tires?
Just curious what I am going to find when I roll out the jack. All my floor jacks, lifts etc are geared toward 4x4s and I need to go get a low profile floor jack. If anyone can share the info, I appreciate it.
#2
RE: Where are the correct Jacking points on the sides just rear of the front tires?
look for biggish flat spots of FRAME metal. in front they are about a foot in from the side of the car. in back, i just jack along the edge of the car frame:
obviously i do this reciprocated on the other side of the car too
obviously i do this reciprocated on the other side of the car too
#3
RE: Where are the correct Jacking points on the sides just rear of the front tires?
Thanks man, i found the area in the front there. Had to buy one of those aluminum jacks so I could get up underneath. Had to take my lower front valance off and fix it where a rock hit my billet grill !*?&. At least it didnt knock a fog light out.
#4
RE: Where are the correct Jacking points on the sides just rear of the front tires?
Here ya go. Print this and put it on the wall in your garage
[IMG]local://upfiles/13513/B8D6F5B8E855461CB14B5F3AB28761FC.gif[/IMG]
[IMG]local://upfiles/13513/B8D6F5B8E855461CB14B5F3AB28761FC.gif[/IMG]
Thread
Thread Starter
Forum
Replies
Last Post
inyadreems
Archive - Mustangs For Sale
2
08-21-2015 09:10 AM