Old school addition
08-31-2006, 09:24 PM
#2
4th Gear Member
Join Date: Apr 2006
Location:
Posts: 1,313
RE: Old school addition
Not bad looking. But given that a 5 year old has the stregnth to take them off, they are not for me.
I dont need to be replacing spinners at 100 bucks a set. It may not happen right away, but sometime, somewhere, mine would get nabbed.
I dont need to be replacing spinners at 100 bucks a set. It may not happen right away, but sometime, somewhere, mine would get nabbed.
09-01-2006, 12:18 AM
#6
4th Gear Member
Join Date: Apr 2005
Location: LI, NY
Posts: 1,065
RE: Old school addition
I like them too, but I'm partial. I had them before the car.
Here are instructions for a mod that makes the spinners impossible to remove without removing the tires first. The mod was less the $5. It uses brass sliding closet door handles inside the spinner tabs to prevent them from being removed.
http://www.cherod.com/mustang/HowTo/spinnerLock.htm
Here are instructions for a mod that makes the spinners impossible to remove without removing the tires first. The mod was less the $5. It uses brass sliding closet door handles inside the spinner tabs to prevent them from being removed.
http://www.cherod.com/mustang/HowTo/spinnerLock.htm
09-01-2006, 02:09 AM
#9
4th Gear Member
Join Date: Apr 2005
Location:
Posts: 1,716
RE: Old school addition
ORIGINAL: odiaz
I like them too, but I'm partial. I had them before the car.
Here are instructions for a mod that makes the spinners impossible to remove without removing the tires first. The mod was less the $5. It uses brass sliding closet door handles inside the spinner tabs to prevent them from being removed.
http://www.cherod.com/mustang/HowTo/spinnerLock.htm
I like them too, but I'm partial. I had them before the car.
Here are instructions for a mod that makes the spinners impossible to remove without removing the tires first. The mod was less the $5. It uses brass sliding closet door handles inside the spinner tabs to prevent them from being removed.
http://www.cherod.com/mustang/HowTo/spinnerLock.htm
