1/4mile & 20" rims
#11
RE: 1/4mile & 20" rims
Iam supposed to be getting my 20 foose wheels installed tomorrow, now you guys are scaring me that I am gonna lose all my horsepower! Is this really true? I mean I would guess u might lose a few hp but 10-30????? Also isnt a stock GT supposed to run in the 13's? So Moose how are u running in the 14's?
#12
RE: 1/4mile & 20" rims
spinning off the line, bogging off the line. You need a good launch. I don't see how they can run 13.3 with a 2.3 60ft unless they have forced induction.
Post a slip!
Post a slip!
ORIGINAL: 1BADD05
Iam supposed to be getting my 20 foose wheels installed tomorrow, now you guys are scaring me that I am gonna lose all my horsepower! Is this really true? I mean I would guess u might lose a few hp but 10-30????? Also isnt a stock GT supposed to run in the 13's? So Moose how are u running in the 14's?
Iam supposed to be getting my 20 foose wheels installed tomorrow, now you guys are scaring me that I am gonna lose all my horsepower! Is this really true? I mean I would guess u might lose a few hp but 10-30????? Also isnt a stock GT supposed to run in the 13's? So Moose how are u running in the 14's?
#14
RE: 1/4mile & 20" rims
I can post a slip the problem is at it isn' clear enough to see in the PC and I didn't mention 13.3what I did was 2.260ft sorry my mistake, 8.846 1/8 @ 82.56 and 13.6 1/4 @ 104.48
#15
RE: 1/4mile & 20" rims
Get some good drag wheels and good drag tires, period!!!!
20's are for pimping around town, you can take them to the track but if you have aftermarket rims invest in DRAG TIRES if you are gonna drag your car!
20's are for pimping around town, you can take them to the track but if you have aftermarket rims invest in DRAG TIRES if you are gonna drag your car!
#16
RE: 1/4mile & 20" rims
ORIGINAL: PRGT
I can post a slip the problem is at it isn' clear enough to see in the PC and I didn't mention 13.3what I did was 2.260ft sorry my mistake, 8.846 1/8 @ 82.56 and 13.6 1/4 @ 104.48
I can post a slip the problem is at it isn' clear enough to see in the PC and I didn't mention 13.3what I did was 2.260ft sorry my mistake, 8.846 1/8 @ 82.56 and 13.6 1/4 @ 104.48
#17
RE: 1/4mile & 20" rims
ORIGINAL: moosestang
spinning off the line, bogging off the line. You need a good launch. I don't see how they can run 13.3 with a 2.3 60ft unless they have forced induction.
Post a slip!
spinning off the line, bogging off the line. You need a good launch. I don't see how they can run 13.3 with a 2.3 60ft unless they have forced induction.
Post a slip!
ORIGINAL: 1BADD05
Iam supposed to be getting my 20 foose wheels installed tomorrow, now you guys are scaring me that I am gonna lose all my horsepower! Is this really true? I mean I would guess u might lose a few hp but 10-30????? Also isnt a stock GT supposed to run in the 13's? So Moose how are u running in the 14's?
Iam supposed to be getting my 20 foose wheels installed tomorrow, now you guys are scaring me that I am gonna lose all my horsepower! Is this really true? I mean I would guess u might lose a few hp but 10-30????? Also isnt a stock GT supposed to run in the 13's? So Moose how are u running in the 14's?
I will get the slip on here later, but the jist of it is:
60': 2.29
1/8: 8.7x
mph: 81
1/4: 13.33
mph: 105.8 IIRC
I'm full bolt-on though. That run was not powershifting. I'm pretty sure I could pull off a 12.90@108 on the 20s on a good track and without the stereo and spare.
#18
RE: 1/4mile & 20" rims
ORIGINAL: Sleeper05
1BADD05--I have Foose Nitrous 20s...they are amazing wheels, and though you will feel a loss in power, it's nothing that an intake and tune won't compensate for twice over.
I will get the slip on here later, but the jist of it is:
60': 2.29
1/8: 8.7x
mph: 81
1/4: 13.33
mph: 105.8 IIRC
I'm full bolt-on though. That run was not powershifting. I'm pretty sure I could pull off a 12.90@108 on the 20s on a good track and without the stereo and spare.
ORIGINAL: moosestang
spinning off the line, bogging off the line. You need a good launch. I don't see how they can run 13.3 with a 2.3 60ft unless they have forced induction.
Post a slip!
spinning off the line, bogging off the line. You need a good launch. I don't see how they can run 13.3 with a 2.3 60ft unless they have forced induction.
Post a slip!
ORIGINAL: 1BADD05
Iam supposed to be getting my 20 foose wheels installed tomorrow, now you guys are scaring me that I am gonna lose all my horsepower! Is this really true? I mean I would guess u might lose a few hp but 10-30????? Also isnt a stock GT supposed to run in the 13's? So Moose how are u running in the 14's?
Iam supposed to be getting my 20 foose wheels installed tomorrow, now you guys are scaring me that I am gonna lose all my horsepower! Is this really true? I mean I would guess u might lose a few hp but 10-30????? Also isnt a stock GT supposed to run in the 13's? So Moose how are u running in the 14's?
I will get the slip on here later, but the jist of it is:
60': 2.29
1/8: 8.7x
mph: 81
1/4: 13.33
mph: 105.8 IIRC
I'm full bolt-on though. That run was not powershifting. I'm pretty sure I could pull off a 12.90@108 on the 20s on a good track and without the stereo and spare.
Richard
#19
RE: 1/4mile & 20" rims
What is your definition of full bolt on?
mine is :
long tube headers
midpipe
catback
udp
cai
heads
TB
cams
dyno tune (not a bolt on but very necessary)
cmcv deletes
mine is :
long tube headers
midpipe
catback
udp
cai
heads
TB
cams
dyno tune (not a bolt on but very necessary)
cmcv deletes
ORIGINAL: Sleeper05
1BADD05--I have Foose Nitrous 20s...they are amazing wheels, and though you will feel a loss in power, it's nothing that an intake and tune won't compensate for twice over.
I will get the slip on here later, but the jist of it is:
60': 2.29
1/8: 8.7x
mph: 81
1/4: 13.33
mph: 105.8 IIRC
I'm full bolt-on though. That run was not powershifting. I'm pretty sure I could pull off a 12.90@108 on the 20s on a good track and without the stereo and spare.
ORIGINAL: moosestang
spinning off the line, bogging off the line. You need a good launch. I don't see how they can run 13.3 with a 2.3 60ft unless they have forced induction.
Post a slip!
spinning off the line, bogging off the line. You need a good launch. I don't see how they can run 13.3 with a 2.3 60ft unless they have forced induction.
Post a slip!
ORIGINAL: 1BADD05
Iam supposed to be getting my 20 foose wheels installed tomorrow, now you guys are scaring me that I am gonna lose all my horsepower! Is this really true? I mean I would guess u might lose a few hp but 10-30????? Also isnt a stock GT supposed to run in the 13's? So Moose how are u running in the 14's?
Iam supposed to be getting my 20 foose wheels installed tomorrow, now you guys are scaring me that I am gonna lose all my horsepower! Is this really true? I mean I would guess u might lose a few hp but 10-30????? Also isnt a stock GT supposed to run in the 13's? So Moose how are u running in the 14's?
I will get the slip on here later, but the jist of it is:
60': 2.29
1/8: 8.7x
mph: 81
1/4: 13.33
mph: 105.8 IIRC
I'm full bolt-on though. That run was not powershifting. I'm pretty sure I could pull off a 12.90@108 on the 20s on a good track and without the stereo and spare.
#20
RE: 1/4mile & 20" rims
ORIGINAL: blueherd02gt
What is your definition of full bolt on?
What is your definition of full bolt on?
pulleys
tb
eh20
alum ds
4.30s
shifter
long tubes
off road x
axle back
charge motion deletes
dyno tune
full bmr chasiss and suspension
sways, shocks, springs
some other stuff