Running Amp Power cord
 

Any one have a suggestion on how to run a 4g power cord from the battery to the trunk? My main concern is getting it throughthe firewall? I was wondering if there is already a hole i can run it thru or if ill have to make one...

RE: Running Amp Power cord
 

I ran mine through an existing groumet located behind the passenger side.

RE: Running Amp Power cord
 

I ran mine through a existing grommet on the passenger side thats just below the battery. Nothing currently runs through it.

RE: Running Amp Power cord
 

Thats probably the same one I used too.

RE: Running Amp Power cord
 

Do i have to remove the battery to see this grommet? I looked for it and didnt see it at all...

RE: Running Amp Power cord
 

Here are some pics if it will help I took of mine. I ran though the grommet, in the wheel well towards the front to get closer to the fuse box area.

Click on the pic for a bigger image.
http://i54.photobucket.com/albums/g1...ireGrommet.jpg
http://i54.photobucket.com/albums/g1...eWheelWell.jpg
http://i54.photobucket.com/albums/g1...pCableFuse.jpg

RE: Running Amp Power cord
 

I ran my through a an unused grommet on the passenger side that led from the battery to the inside of the car... then i just ran the power wire under the carpet and moldings all the way to the trunk

RE: Running Amp Power cord
 

Thats what I did as well but what did everyone hook up the remote wire to?

RE: Running Amp Power cord
 

When I was using the stock head unit, I found and tapped intothe ACC wire that lead into the stock HU. Sorry but can't remember what color it was. Now I have an aftermarket HU and run off the ACC wire specific for the remote wire.

RE: Running Amp Power cord
 

I just ran my remote wire to a circuit only hot in run then to a switch so I can shut it off when my lady starts to complain.