PennState

so i just had a fun 800 mile drive and i tightened the two bolts for the hurst shifter and by the time i got back its gotton loose again..like the part where the shifters boot is..anyone have this problem or know how to solve it..

Eleanor06

Yes,I used some light strength thread locker and fixed the problem.

partsbill

loc-tight works great, or longer bolts with nuts & lock washers.

acascianelli

Loc-tight is your friend

blaven

yup blue loc tight will take care of that, did it with mine and no troubles since

goharv

+1 Had the same prob and blue loc tite fixed it right up. 5k miles and the bolts haven't moved.

acascianelli

I actually had to use different bolts than those that came with it, I didn't use loctite on mine and it still hasn't came loose. I've had mine on for about 3 months now.

ZZmustang

Suuup Jay
Get longer bolts, Double Nut the bolts and tighten one nut against the other.

PennState

oh ok..ill have to go buy that..if i use lock tite will i every be able to remove the shifter

Eleanor06

Yes,just don't use the permanent strength (red I believe)