ftpolice

im looking for some ways to get some power i put cold air, throttle body, x pipe, slp loudmouth, looking for a tuner but not sher what one to get any tips? and what els could iput on? pm me with any ideas PLEASE!

hammeron

which cai did you install

olvanish

if you're all about bolt on's pulleys would be a good shot... have you gotten headers yet?

ftpolice

i put on a k&n, and no i dont have headers

brad281

im looking for some ways to get some power i put cold air, throttle body, x pipe, slp loudmouth, looking for a tuner but not sher what one to get any tips?

Get a tuner w/custom tune. That will give you more power than all the mods you have listed. Cold air w/o tune you probably netted 4-5 hp. TB = wash. x pipe +slp maybe 4-5 hp if you have the fact. cats still in place.

s197richie

That K&N is kind of a ****...I'd recommend the C&L street/sct xcal 2 from brenspeed but if you're keeping the K&N then at least pick up the sct xcal 2 from brenspeed. Other than that, well the pulleys might add 10 rwhp and some shorties not even that...but if what you really mean isyou're looking for ways to get "speed", well a short gear would be a night and day difference, also some rear control arms and drag radials...these three things could shave off a good .5-1.0 in the 1320...
p.s. as previously posted the tb is a **** and you know the axlebacks yield zero gain, right? I've read maybe a few ponies on the o/r x...

06tyrfryr

if you put this stuff on and didnt tune it you are most likely running lean and not getting any power gains. cai and tb are worthless if you dont add fuel to go with it.

explict

Racing stripes.

Gene K

Ba ma chips, Brenspeed, Evolution, VMPTuning. Just make sure you get it on a SCTXcal2.

No particular order. If you live close to one of them I would lean that direction. Ba ma seems to particularly well with autos.