How much spent on mods
#21
RE: How much spent on mods
I haven't spent the $$ yet (need to sell my other car first), but this is what I plan on doing:
Tune (haven't decided which tuner or where to get it yet) - $400
M-5230-GTA Ford Racing axle backs from Ninosport - $300
20" AR Razor wheels/tires - $1600 (ebay)
Tint - $300
3D Carbon Eleanor Grille - $200
Street Scene lower speed grill - $100
Kenwood DNX-7100 navi unit - $1000 (ebay)
Speakers/Amps/subs - Free (transfer from my old car)
Clear bra (self install from ebay) - $200
Total: $4,100
*I only spent $22.4k to buy my new GT, so I'm justifying most of the additional $$ I will spend on mods by thinking that I could have easily paid $26k on my car.
Tune (haven't decided which tuner or where to get it yet) - $400
M-5230-GTA Ford Racing axle backs from Ninosport - $300
20" AR Razor wheels/tires - $1600 (ebay)
Tint - $300
3D Carbon Eleanor Grille - $200
Street Scene lower speed grill - $100
Kenwood DNX-7100 navi unit - $1000 (ebay)
Speakers/Amps/subs - Free (transfer from my old car)
Clear bra (self install from ebay) - $200
Total: $4,100
*I only spent $22.4k to buy my new GT, so I'm justifying most of the additional $$ I will spend on mods by thinking that I could have easily paid $26k on my car.
#22
RE: How much spent on mods
ORIGINAL: zkiller
Just a few mods:
custom painted stripes 2400
car cover                      3 00
polished KB w/install   7500
chrome cam covers      300
Rims and tires             2100
rotors                             250
hawk pads                       90
castrol DOT4 fluid          175
3.73 gear parts/labor     600
FRRP exhaust               450
SOS pod                        160
CDC dash pod               100
Autometer gauges          1000
CDC sequentials               160
custom rollbar               2200
paint job on rollbar          600
Mickey Thompson ETs     380
GMS loops                     240
GMS COPSÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 540 (regret)
MSD COPs                    400 (good)
SCT tuner                        375
Custom dyno tuning          500
GMS control arms            250 (not using them)
5 point harness                 160
custom emblems               400
custom buff clearcoat         280
Level 10 Stage III tranny and converter 5500
Poewerhouse driveshaft     700
Thats about $28,200 in mods so far.
Just a few mods:
custom painted stripes 2400
car cover                      3 00
polished KB w/install   7500
chrome cam covers      300
Rims and tires             2100
rotors                             250
hawk pads                       90
castrol DOT4 fluid          175
3.73 gear parts/labor     600
FRRP exhaust               450
SOS pod                        160
CDC dash pod               100
Autometer gauges          1000
CDC sequentials               160
custom rollbar               2200
paint job on rollbar          600
Mickey Thompson ETs     380
GMS loops                     240
GMS COPSÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 540 (regret)
MSD COPs                    400 (good)
SCT tuner                        375
Custom dyno tuning          500
GMS control arms            250 (not using them)
5 point harness                 160
custom emblems               400
custom buff clearcoat         280
Level 10 Stage III tranny and converter 5500
Poewerhouse driveshaft     700
Thats about $28,200 in mods so far.
I don't want to know the actual 'total' of what I put into this car cause it would probably **** me off...[:@] Sure doesn't seem that much as you are doing it but after it adds up - geez![:@]
#24
RE: How much spent on mods
ORIGINAL: fordfanboy
I saw your post and decided not to even make a post...lol
I don't want to know the actual 'total' of what I put into this car cause it would probably **** me off...[:@] Sure doesn't seem that much as you are doing it but after it adds up - geez![:@]
ORIGINAL: zkiller
Just a few mods:
custom painted stripes 2400
car cover300
polished KBw/install7500
chrome cam covers 300
Rims and tires 2100
rotors250
hawk pads90
castrol DOT4 fluid175
3.73 gear parts/labor 600
FRRP exhaust 450
SOS pod160
CDC dash pod 100
Autometer gauges1000
CDC sequentials160
custom rollbar 2200
paint job on rollbar 600
Mickey Thompson ETs380
GMS loops 240
GMS COPS 540 (regret)
MSD COPs 400 (good)
SCT tuner 375
Custom dyno tuning 500
GMS control arms 250 (not using them)
5 point harness 160
custom emblems 400
custom buff clearcoat280
Level 10 Stage III tranny and converter 5500
Poewerhouse driveshaft 700
Thats about $28,200 in mods so far.
Just a few mods:
custom painted stripes 2400
car cover300
polished KBw/install7500
chrome cam covers 300
Rims and tires 2100
rotors250
hawk pads90
castrol DOT4 fluid175
3.73 gear parts/labor 600
FRRP exhaust 450
SOS pod160
CDC dash pod 100
Autometer gauges1000
CDC sequentials160
custom rollbar 2200
paint job on rollbar 600
Mickey Thompson ETs380
GMS loops 240
GMS COPS 540 (regret)
MSD COPs 400 (good)
SCT tuner 375
Custom dyno tuning 500
GMS control arms 250 (not using them)
5 point harness 160
custom emblems 400
custom buff clearcoat280
Level 10 Stage III tranny and converter 5500
Poewerhouse driveshaft 700
Thats about $28,200 in mods so far.
I don't want to know the actual 'total' of what I put into this car cause it would probably **** me off...[:@] Sure doesn't seem that much as you are doing it but after it adds up - geez![:@]
Zkiller, one word NICE!
#27
RE: How much spent on mods
Not in the order of aquisition but here goes.....
Airaid CAI = 375.
Brent's 3 Tunes = 125
JBA Axle Backs = 285.
FRPP X-Pipe = 139.
JBA SS/Shorties = 300.
2007 Plenum Cover = 59.
Sequential'sa must have= 99.
SHR Honeycomb Panel = 139.
SS/ Tail light bezels = 64.
Chrome Bullits = 500.
Hurst Shifter = 169.
ShelbySpoiler = 160.
1/4 window louvers= 140.
Astra Hammond rear = 245.
8"Shorty Ant. = 19.
Chrome Pony power plug= 37.
Stars & stripes pony 39. (not installed)
Chrome door handle covers = 15. (not installed)
FRPP 3.73 ring & pinionP&L = 375.
Clear cornerlenses = 39.
SCT Tuner= 379.
Steeda UDP's = 200.
I know there's more but I can't think of it right now
Airaid CAI = 375.
Brent's 3 Tunes = 125
JBA Axle Backs = 285.
FRPP X-Pipe = 139.
JBA SS/Shorties = 300.
2007 Plenum Cover = 59.
Sequential'sa must have= 99.
SHR Honeycomb Panel = 139.
SS/ Tail light bezels = 64.
Chrome Bullits = 500.
Hurst Shifter = 169.
ShelbySpoiler = 160.
1/4 window louvers= 140.
Astra Hammond rear = 245.
8"Shorty Ant. = 19.
Chrome Pony power plug= 37.
Stars & stripes pony 39. (not installed)
Chrome door handle covers = 15. (not installed)
FRPP 3.73 ring & pinionP&L = 375.
Clear cornerlenses = 39.
SCT Tuner= 379.
Steeda UDP's = 200.
I know there's more but I can't think of it right now
#28
RE: How much spent on mods
ORIGINAL: white07
so the cams, springs and install was only 1500?
ORIGINAL: ratnacage
Crower Cams custom grind w/springs
1500
Crower Cams custom grind w/springs
1500
#29
RE: How much spent on mods
Some of you guys have spent some major $$$ on your Stangs. I bet your wives/girlfriends give you hell about it. When they do just tell them at least you aren`t as bad as bazguitarman. I havn`t even bought my Mustang yet and have already speced out about $20,000 for mods. That`s just the mods I know right now I`ll do. Who knows what will come on down the line.
Stage 1 mods:
* Suspension(Steeda/BMR/Eibach)-$2,012.40
* Brakes(Brenspeed stage 2)-$769.00
* CAI/tune and UDP`s(Brenspeed, C&L "racer" w/Xcal 2 and Steeda UDP`s)-$798.95
* Exhaust(Brenspeed, Mac o/r Pro-chamber & axle back)-$772.45
* Wheels & tires(Late Model Restoration, Shelby Razors 18"x9" & tires w/road hazard)-$1,349.90
* Rear gear/install kit/gear oil(Brenspeed)-$273.97
* Drive shaft(Leonard Racing, Spyder shaft)-$505.00
* Short throw shifter(MGW)-$295.00
* Exterior cosmetic(Silver Horse Racing, billet fuel door, billet rear medallion)-$268.00
* Interior cosmetic(MGW, various billet pieces)-$226.00
* Stereo(Crutchfield, Pioneer/Infinity)-$1,769.88
Stage 1 total- $9,040.55 (without labor)
Stage 2 mods include a forged, stroker bottom end rebuild, Whipple HP SC, 31 spline rear end rebuild with Auburn Ected differential and Moser 31 spline axles, and long tube headers.
Stage 2 total: approximately $9,500.00 (without labor)
Grand total: $18,540.00
Labor will add a little more, but I`ll do most everything myself except for the suspension, rear gear and maybe the SC. I`m actually thinking of driving up to IN to have Brenspeed do the stage 1 install. And to have a dyno tune done
Honestly, I`ve had a lot of fun just doing the research, looking at parts and talking to you guys. I can`t wait to get my GT and start wrenching on it.
Eric
Stage 1 mods:
* Suspension(Steeda/BMR/Eibach)-$2,012.40
* Brakes(Brenspeed stage 2)-$769.00
* CAI/tune and UDP`s(Brenspeed, C&L "racer" w/Xcal 2 and Steeda UDP`s)-$798.95
* Exhaust(Brenspeed, Mac o/r Pro-chamber & axle back)-$772.45
* Wheels & tires(Late Model Restoration, Shelby Razors 18"x9" & tires w/road hazard)-$1,349.90
* Rear gear/install kit/gear oil(Brenspeed)-$273.97
* Drive shaft(Leonard Racing, Spyder shaft)-$505.00
* Short throw shifter(MGW)-$295.00
* Exterior cosmetic(Silver Horse Racing, billet fuel door, billet rear medallion)-$268.00
* Interior cosmetic(MGW, various billet pieces)-$226.00
* Stereo(Crutchfield, Pioneer/Infinity)-$1,769.88
Stage 1 total- $9,040.55 (without labor)
Stage 2 mods include a forged, stroker bottom end rebuild, Whipple HP SC, 31 spline rear end rebuild with Auburn Ected differential and Moser 31 spline axles, and long tube headers.
Stage 2 total: approximately $9,500.00 (without labor)
Grand total: $18,540.00
Labor will add a little more, but I`ll do most everything myself except for the suspension, rear gear and maybe the SC. I`m actually thinking of driving up to IN to have Brenspeed do the stage 1 install. And to have a dyno tune done
Honestly, I`ve had a lot of fun just doing the research, looking at parts and talking to you guys. I can`t wait to get my GT and start wrenching on it.
Eric