install a len tech tranny in one day my a$$
09-21-2007, 02:14 AM
#1
2nd Gear Member
Thread Starter
Join Date: Oct 2006
Location: leduc,alberta
Posts: 272
install a len tech tranny in one day my a$$
yes 7 weeks 60 wires all new braided lines ( comes with tube and a hose clamp just slip it on and tighten gear clamp right) differnt driveshaft hammer to floor boards ect ect
this sucks got everthing together shift close load up take it to the specialist and 5 hrs on the dyno find out we have to down load a 06 manual program due to the pcu looking for a transmission that in not there. the list goes on and on
2 months ago the modified ford magazine said you can install this on your drive way. well talk talked to them today they still having problems.
good news the tranny can take 1200 hp no way going to hurt the thing if we every get it to run
any one everthinking of doing this let me know will save you a lot of time and money
this sucks got everthing together shift close load up take it to the specialist and 5 hrs on the dyno find out we have to down load a 06 manual program due to the pcu looking for a transmission that in not there. the list goes on and on
2 months ago the modified ford magazine said you can install this on your drive way. well talk talked to them today they still having problems.
good news the tranny can take 1200 hp no way going to hurt the thing if we every get it to run
any one everthinking of doing this let me know will save you a lot of time and money
09-21-2007, 07:09 AM
#2
4th Gear Member
Join Date: Feb 2007
Location: Illinois
Posts: 1,726
RE: install a len tech tranny in one day my a$$
I went with a built 5R55S tranny because I wanted to maintain 5 speeds and all then stock PCM control. I went with Level 10 Stage III and their converter.
It was like a 4 hour install. I cant imagine how you could doall that custom conversion in a short time though.
It was like a 4 hour install. I cant imagine how you could doall that custom conversion in a short time though.
09-21-2007, 07:20 AM
#4
5th Gear Member
Join Date: Mar 2006
Location: Longwood, FL
Posts: 2,899
RE: install a len tech tranny in one day my a$$
ORIGINAL: stangoil
yes 7 weeks 60 wires all new braided lines ( comes with tube and a hose clamp just slip it on and tighten gear clamp right) differnt driveshaft hammer to floor boards ect ect
this sucks got everthing together shift close load up take it to the specialist and 5 hrs on the dyno find out we have to down load a 06 manual program due to the pcu looking for a transmission that in not there. the list goes on and on
2 months ago the modified ford magazine said you can install this on your drive way. well talk talked to them today they still having problems.
good news the tranny can take 1200 hp no way going to hurt the thing if we every get it to run
any one everthinking of doing this let me know will save you a lot of time and money
yes 7 weeks 60 wires all new braided lines ( comes with tube and a hose clamp just slip it on and tighten gear clamp right) differnt driveshaft hammer to floor boards ect ect
this sucks got everthing together shift close load up take it to the specialist and 5 hrs on the dyno find out we have to down load a 06 manual program due to the pcu looking for a transmission that in not there. the list goes on and on
2 months ago the modified ford magazine said you can install this on your drive way. well talk talked to them today they still having problems.
good news the tranny can take 1200 hp no way going to hurt the thing if we every get it to run
any one everthinking of doing this let me know will save you a lot of time and money
What the hell are you getting charged for labor, hope the shop knows what they're doing.
-Jeff
09-21-2007, 08:22 AM
#6
4th Gear Member
Join Date: May 2007
Location: Richmond, VA
Posts: 1,081
RE: install a len tech tranny in one day my a$$
ORIGINAL: marcuskeeler
My brain hurts reading that [&:]
My brain hurts reading that [&:]
Is he saying it has taken 7 weeks to install a transmission and it still doesn't work?
Thread
Thread Starter
Forum
Replies
Last Post
Diode Dynamics
Vendor For Sale / Group Buy Classifieds
28
05-26-2022 12:02 PM
ShaneB26154
4.6L (1996-2004 Modular) Mustang
35
03-04-2021 04:05 AM
HorsePower99
4.6L (1996-2004 Modular) Mustang
1
08-26-2015 11:29 PM
