tore up a BSM Superstripe... :-X - MustangForums.com

Go Back  MustangForums.com > Ford Mustang Tech > 2005-2014 Mustangs
Reload this Page >

tore up a BSM Superstripe... :-X

Notices
2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.

tore up a BSM Superstripe... :-X

Reply

 
 
 
Old 12-05-2007, 05:36 PM
  #1  
SonicBlue05GT
4th Gear Member
Thread Starter
 
Join Date: Apr 2007
Location: Gulf Coast
Posts: 1,918
Default tore up a BSM Superstripe... :-X

Seriously, the hood section of the Super Stripe is a BITCH to put on.

I've put stripes on about 15 cars now, without many issues... but Gotdayum, It constantly bunches up in the middle and ends. After I creased it twice, I decided it was time to take it off and rip it in half. [:@]

I think dual 10" white stripes will look better anyway.

130 bucks down the drain. awesome. [&:]

/rant.

(btw, I still have the rest of the stripes, untouched, if anyone needs replacements.. gloss white)
SonicBlue05GT is offline  
Reply With Quote
Old 12-05-2007, 05:55 PM
  #2  
05gtdriver
5th Gear Member
 
05gtdriver's Avatar
 
Join Date: Aug 2006
Location: Los Angeles Ca
Posts: 2,127
Default RE: tore up a BSM Superstripe... :-X

E-mailRob(at BSM) and tell him what happened, he'll work with you on getting that center stripe replaced I'm sure. I had a mishap with my front bumper stripes(twice!) and he replaced the 6 pieces that make up the bumper section(for like $20 including shipping). Get a hold of him first, and you'll be surprised by what you might hear.
05gtdriver is offline  
Reply With Quote
Old 12-05-2007, 06:51 PM
  #3  
SonicBlue05GT
4th Gear Member
Thread Starter
 
Join Date: Apr 2007
Location: Gulf Coast
Posts: 1,918
Default RE: tore up a BSM Superstripe... :-X

yeah, i'll shoot an e-mail. but i am determined on dual stripes now anyway
SonicBlue05GT is offline  
Reply With Quote
Old 12-05-2007, 06:53 PM
  #4  
rford426
4th Gear Member
 
Join Date: Nov 2007
Location: OK&TX
Posts: 1,904
Default RE: tore up a BSM Superstripe... :-X

could have been worse
rford426 is offline  
Reply With Quote
Old 12-05-2007, 08:40 PM
  #5  
mlcrycc
5th Gear Member
 
mlcrycc's Avatar
 
Join Date: Feb 2005
Location: Anaheim, California
Posts: 4,205
Default RE: tore up a BSM Superstripe... :-X

Yep, the SS on the hood is a challenge, to say the least. My advice, if you do go back to it, is get it set as close to the windshield as possible, then work toward the nose. I had wrinkles in the stripe right at the front of the hood for probably an hour or an hour and a half after setting the part closest to the windshield. It became a matter of principle for me, since supposedly it would fit!!
Keep smoothing the wrinkles toward the nose, as you tuck the strip under the front hood lip......eventually, the wrinkles will stay gone as the stripe sticks while tucking it under.....

Sucks, I know.....

Good Luck,
Mike

mlcrycc is offline  
Reply With Quote
Reply
 
 
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
black01gt
4.6L (1996-2004 Modular) Mustang
2
01-22-2006 11:54 AM
black01gt
Street/Strip
11
01-22-2006 03:33 AM
chrisc
V6 S197 General Discussion
4
01-16-2006 06:10 AM
Soaring
Classic Mustangs (Tech)
8
09-16-2005 12:43 AM
98LS1
Off Topic
29
08-18-2004 11:00 PM

Forum Jump

Thread Tools
Search this Thread
Advertising
Featured Sponsors
Vendor Directory