getting ready for PA emissions, TOO LEAN codes
01-18-2008, 04:55 PM
#11
2nd Gear Member
Thread Starter
Join Date: Mar 2007
Location: Greater Philadelphia area
Posts: 408
RE: getting ready for PA emissions, TOO LEAN codes
Update:
Brent did respond to my email and stated that the tune I have turns off the 02 sensors. He said he could send me a new tune if I wanted, but the I already had the CAI off... so I replaced stock airbox, disconnected the battery for a couple of hours, reset to stock and put on 50 miles to ensure there was a new OBD history for them to see.
Final result: passed the various emissions tests.
This weekend I will put re-install the CAI (its a snap now that I have done it a couple of times) and the 93 tune. ...a good excuse to drive it, ya know, make sure everything is in order an all......
Brent did respond to my email and stated that the tune I have turns off the 02 sensors. He said he could send me a new tune if I wanted, but the I already had the CAI off... so I replaced stock airbox, disconnected the battery for a couple of hours, reset to stock and put on 50 miles to ensure there was a new OBD history for them to see.
Final result: passed the various emissions tests.
This weekend I will put re-install the CAI (its a snap now that I have done it a couple of times) and the 93 tune. ...a good excuse to drive it, ya know, make sure everything is in order an all......
Thread
Thread Starter
Forum
Replies
Last Post
mrappe
V6 (1994-2004) Mustangs
0
09-26-2015 10:16 AM
06, 2011, california, codes, difference, dyno, emission, emissions, ford, lean, montgomery, mustang, pa, philadelphia, read, ready, rpms, testing, wont
