Stupid BMR LCA question
#11
RE: Stupid BMR LCA question
ORIGINAL: Ford_Dude
you put the greese inbetween the poly and the metal that holds the poly
1. Buy beer and greese gun
2. get greese
3. put greese into greese gun and open beer
4. connect the greese gun to the zerk fitting and drink beer
5. pump the grease gun and grab another beer
6. disconnect the greese gun and open beer
7. repeat steps 4-6on other poly bushings until beer is gone
you put the greese inbetween the poly and the metal that holds the poly
1. Buy beer and greese gun
2. get greese
3. put greese into greese gun and open beer
4. connect the greese gun to the zerk fitting and drink beer
5. pump the grease gun and grab another beer
6. disconnect the greese gun and open beer
7. repeat steps 4-6on other poly bushings until beer is gone
#13
RE: Stupid BMR LCA question
ORIGINAL: DarkFireGT
Fixt [sm=grinangel.gif]
ORIGINAL: Ford_Dude
you put the greese inbetween the poly and the metal that holds the poly
1. Buy beer and grease gun
2. get grease
3. put greese into grease gun and open beer
4. connect the grease gun to the zerk fitting and drink beer
5. pump the grease gun and grab another beer
6. disconnect the grease gun and open beer
7. repeat steps 4-6on other poly bushings until beer is gone
you put the greese inbetween the poly and the metal that holds the poly
1. Buy beer and grease gun
2. get grease
3. put greese into grease gun and open beer
4. connect the grease gun to the zerk fitting and drink beer
5. pump the grease gun and grab another beer
6. disconnect the grease gun and open beer
7. repeat steps 4-6on other poly bushings until beer is gone
Thread
Thread Starter
Forum
Replies
Last Post
treesloth
New Member Area
4
09-28-2015 07:03 AM