those that have changed coil or plugs
04-25-2008, 08:37 PM
1st Gear Member
Thread Starter
Join Date: Oct 2006
Location: sf bay area
Posts: 112
those that have changed coil or plugs
Can u remember the socket size for the little bolt that holds down the coilpack to the manifold? I tried a 1/4"..too small,5/16 too big,6mm..small, 7mm sloppy..., 8mm too big! doing the plug change and need the right size socket before I start. Thanks
04-25-2008, 08:49 PM
6th Gear Member
Join Date: May 2006
Location: Nicely done
Posts: 11,881
RE: those that have changed coil or plugs
the documentation i have, calls for
a 7mm socket
04-25-2008, 08:54 PM
6th Gear Member
Join Date: Sep 2006
Location: Gainesville, FL
Posts: 11,278
RE: those that have changed coil or plugs
Quote:
ORIGINAL: hammeron
the documentation i have, calls for
a 7mm socket
That's what I use. It's not like they are really tight.
04-25-2008, 08:57 PM
3rd Gear Member
Join Date: Sep 2007
Location: Eagle, Idaho
Posts: 578
RE: those that have changed coil or plugs
7mm or 9/32", either will work fine.
04-25-2008, 09:30 PM
6th Gear Member
Join Date: May 2006
Location: Nicely done
Posts: 11,881
RE: those that have changed coil or plugs
yeah and if i had to guess, i'd
say they were only about 53 inch/lbs
Quote:
ORIGINAL: moosestang
That's what I use. It's not like they are really tight .
04-25-2008, 09:53 PM
1st Gear Member
Thread Starter
Join Date: Oct 2006
Location: sf bay area
Posts: 112
RE: those that have changed coil or plugs
Thanks all, I will get a new 7mm socket tomorrow and start the plug exchange. Wish me luck.
04-25-2008, 10:41 PM
4th Gear Member
Join Date: Dec 2006
Location: Southern California(Orange County)
Posts: 1,400
RE: those that have changed coil or plugs
I thought it was a 9/16. Pretty sure that is what I used...maybe
04-25-2008, 11:54 PM
2nd Gear Member
Join Date: Nov 2007
Location: Calgary, AB
Posts: 210
RE: those that have changed coil or plugs
Quote:
ORIGINAL: DeStonn
I thought it was a 9/16. Pretty sure that is what I used...maybe
Yeah, 9/16 for the plugs and 7mm for the coils. I just finished that job today (with Brisk plugs).
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Granatelli Sales
GT S197 General Discussion
5
03-25-2016 08:01 PM
2007StangV6
2005-2014 Mustangs
30
01-28-2016 06:09 PM
Granatelli Sales
S550 2015-2023 Mustang
5
12-27-2015 06:28 PM
Emblazoned
General Tech
0
09-03-2015 10:45 PM