those that have changed coil or plugs
 

Can u remember the socket size for the little bolt that holds down the coilpack to the manifold? I tried a 1/4"..too small,5/16 too big,6mm..small, 7mm sloppy..., 8mm too big! doing the plug change and need the right size socket before I start. Thanks

RE: those that have changed coil or plugs
 

the documentation i have, calls for
a 7mm socket

RE: those that have changed coil or plugs
 

That's what I use. It's not like they are really tight.

RE: those that have changed coil or plugs
 

7mm or 9/32", either will work fine.

RE: those that have changed coil or plugs
 

yeah and if i had to guess, i'd
say they were only about 53 inch/lbs :D

RE: those that have changed coil or plugs
 

Thanks all, I will get a new 7mm socket tomorrow and start the plug exchange. Wish me luck.

RE: those that have changed coil or plugs
 

I thought it was a 9/16. Pretty sure that is what I used...maybe:eek:

RE: those that have changed coil or plugs
 

Yeah, 9/16 for the plugs and 7mm for the coils. I just finished that job today (with Brisk plugs).