This Weeks Mods...Three Go, One Show..Pics...
#1
This Weeks Mods...Three Go, One Show..Pics...
Great week on the mod front. Finally got a bunch of boxes of goodies out of the kitchen, and on the car......
First Go Mod.
Before.....
And After....
2nd Go Mod.
Before.....
And After...
Third Go Mod.
Before....
And After...
As far as the show mod, I have always had the Silver Horse Racing Medallion on, but wanted to swap the outer ring to anodized black, to offset the polished door....
Thanks to Brandon for the sale of the anodized outer ring.
Lovin the go mods. No dyno yet, but obvious gains with doing all three at once. Eventually will get her on a dyno, but for now, the seat of the pants dyno says good move.......
Mike
First Go Mod.
Before.....
And After....
2nd Go Mod.
Before.....
And After...
Third Go Mod.
Before....
And After...
As far as the show mod, I have always had the Silver Horse Racing Medallion on, but wanted to swap the outer ring to anodized black, to offset the polished door....
Thanks to Brandon for the sale of the anodized outer ring.
Lovin the go mods. No dyno yet, but obvious gains with doing all three at once. Eventually will get her on a dyno, but for now, the seat of the pants dyno says good move.......
Mike
#6
RE: This Weeks Mods...Three Go, One Show..Pics...
Thanks guys....
The first one in the before pic are the stock CMCV plates. (charge motion control valves) Hard to tell from the after pics, but they are the CMCV delete plates....
Oh ya, there is a definite difference with the shortys....doing all three at once, hard to put a number to it, but I am guessing about 20 or 25 between all three....
Thanks Ken. Exhaust tone is lowered a level or two, with that distinctive header pulse to it at idle...At WOT, it picked up the decibel level a couple.....And yes, very pleased with how the medallion came out. And the black ring sure shows off the custom interior of the medallion nicely......
Thx,
Mike
The first one in the before pic are the stock CMCV plates. (charge motion control valves) Hard to tell from the after pics, but they are the CMCV delete plates....
Oh ya, there is a definite difference with the shortys....doing all three at once, hard to put a number to it, but I am guessing about 20 or 25 between all three....
Thanks Ken. Exhaust tone is lowered a level or two, with that distinctive header pulse to it at idle...At WOT, it picked up the decibel level a couple.....And yes, very pleased with how the medallion came out. And the black ring sure shows off the custom interior of the medallion nicely......
Thx,
Mike
#8
RE: This Weeks Mods...Three Go, One Show..Pics...
ORIGINAL: cobraa99
how difficult was your header install?..attempted install on 99 cobra..ended being a 3 day project, had to lift the motor.
how difficult was your header install?..attempted install on 99 cobra..ended being a 3 day project, had to lift the motor.
I had all three done by a shop at the same time. I did watch him during the last two hours of the header install....Better him than me....[8D][8D]
#10
RE: This Weeks Mods...Three Go, One Show..Pics...
ORIGINAL: rojizostang
did you have to do a tune with the delete plates?
did you have to do a tune with the delete plates?
Mike