BMR camber bolts, where do they go?
04-29-2008, 12:12 PM
#1
5th Gear Member
Thread Starter
Join Date: Aug 2006
Location: Near Wash. DC Posts: 13,541
Posts: 2,497
BMR camber bolts, where do they go?
I can't seem to find where these bolts are supposed to go, I'm about to start the install for a related peice so I don't want have to redo removing parts. Obviously they go on the top part of the strut mount, but can anyone explain this in specific? I usually don't like to do things without an instal guide...
04-29-2008, 12:51 PM
#2
5th Gear Member
Join Date: May 2007
Location: N/A
Posts: 2,690
RE: BMR camber bolts, where do they go?
Okay not positive because I didn't do mine. I believe they go where the Spindle attaches to the strut. I seem to remember them there when we pulled out my old Tokico's and put in the BMR /QA1 coil over kit.
04-29-2008, 12:59 PM
#3
3rd Gear Member
Join Date: Aug 2007
Location: Brooklyn, New York
Posts: 947
RE: BMR camber bolts, where do they go?
ORIGINAL: PLstang
Okay not positive because I didn't do mine. I believe they go where the Spindle attaches to the strut. I seem to remember them there when we pulled out my old Tokico's and put in the BMR /QA1 coil over kit.
Okay not positive because I didn't do mine. I believe they go where the Spindle attaches to the strut. I seem to remember them there when we pulled out my old Tokico's and put in the BMR /QA1 coil over kit.
in the top hole. I actually snapped the lock tab on mine last week so I was getting a bad popping sound from the rotor moving around. Life is good now though, just need an alignment pretty bad
Thread
Thread Starter
Forum
Replies
Last Post
