Pioneer Avic D3 system installed
#1
Pioneer Avic D3 system installed
I have an '05 GT with the 5-spd manual transmission. I installed an Avic D3 in the car. The car originally had the Shaker 1000 system. My question is about the load popping noise when the system is first turned on. Any way to get around this? Where would I connect the illimination wire as the screen is blinding at night time when set on Nav.
Any input would be great.
Any input would be great.
#2
#3
RE: Pioneer Avic D3 system installed
I like that thread for the POPPING sound. But that's all... Other than that the wires are all ran all over the place and what not. Here's the other one... https://mustangforums.com/m_4489289/tm.htm
#5
RE: Pioneer Avic D3 system installed
ORIGINAL: ThumperMX113
Should of researched it before installing it, you need to get a voltage regulator.
Should of researched it before installing it, you need to get a voltage regulator.
#7
RE: Pioneer Avic D3 system installed
When I got my DNX5120 yesterday, they asked me if I want it installed or do I want to install it myself. I told them Ill try myself since there was so much info on the forums to tackle the job. I was just about to ask about the wire harness with a 5v REGULATOR, when the guy asked me if I had a shaker. I said yes and he gave me a harness that was for 04-07 amped FORD/LINCOLN cars with a 1.5 RESISTOR. I assuming Al & Eds knows what I need and that a resistor and regulator would do the same thing. Let me know if I am wrong.
#8
RE: Pioneer Avic D3 system installed
ORIGINAL: sp44
It's not in the manual but it's in every Mustang write up on every Mustang message board.
It's not in the manual but it's in every Mustang write up on every Mustang message board.
For those that provided actual answers along with links to places to get the answers I applaude you for your help and patience. Here is a pic of the final product.I still have the illumination wire to connect but I found in other post already so i could save myself the wrathe of those with little time but to be negative.
[IMG]local://upfiles/98293/4090376B07D048B38F684A884723C367.jpg[/IMG]
[IMG]local://upfiles/98293/38838CF161E14193AE05618DEDED640C.jpg[/IMG]