Notices
2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.
Sponsored by:
Sponsored by:

Bama 93 Torque Tune - Holds Revs Too Long?

Thread Tools
 
Search this Thread
 
Old 06-08-2008, 06:11 PM
  #1  
alumacomp
2nd Gear Member
Thread Starter
 
alumacomp's Avatar
 
Join Date: Jan 2006
Posts: 184
Default Bama 93 Torque Tune - Holds Revs Too Long?

I just installed theBama 93 torque tune. Previously I was running the Evo 91 tune.

While the car pulls hard, compared to the Evo tune I really notice that Bama holds revs when I lift off the gas and there is very little engine braking.Is this typical for the torque tune? Does the Bama race tune eliminate this?
alumacomp is offline  
Old 06-08-2008, 07:56 PM
  #2  
imnotmy77stang
2nd Gear Member
 
imnotmy77stang's Avatar
 
Join Date: Apr 2008
Location:
Posts: 393
Default RE: Bama 93 Torque Tune - Holds Revs Too Long?

i have a 93 torq and 93 perf tune from bama, the torque definately pulls harder off the line - to an extent all his tunes shift a little high. i cannot compare to another aftermarket tuner, but i noticed that after driving for awhile (on the 87 perf tune) that at part throttle it shifts almost stock, firmer, but not too much higher. its actually a really nice tune for DD'ing, and i only lost about 1 mpg when switching from stock.
imnotmy77stang is offline  
Old 06-08-2008, 09:25 PM
  #3  
alumacomp
2nd Gear Member
Thread Starter
 
alumacomp's Avatar
 
Join Date: Jan 2006
Posts: 184
Default RE: Bama 93 Torque Tune - Holds Revs Too Long?

Forgot to mention I have a manual....
alumacomp is offline  
Old 06-08-2008, 11:57 PM
  #4  
HotBlue05
 
HotBlue05's Avatar
 
Join Date: Jul 2007
Location:
Posts: 38
Default RE: Bama 93 Torque Tune - Holds Revs Too Long?

I havea Brenspeed tune and my revs hang a little also
HotBlue05 is offline  
Old 06-09-2008, 08:07 AM
  #5  
alumacomp
2nd Gear Member
Thread Starter
 
alumacomp's Avatar
 
Join Date: Jan 2006
Posts: 184
Default RE: Bama 93 Torque Tune - Holds Revs Too Long?

Does the Bama race tune eliminate or reduce the hanging revs?
alumacomp is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
djbigskrilla
2005-2014 Mustangs
24
09-20-2022 01:04 AM
msavoia23
4.6L (1996-2004 Modular) Mustang
12
07-07-2018 12:08 PM
drfister
2005-2014 Mustangs
11
05-03-2018 10:38 PM
whatsup62
5.0L GT S550 Tech
3
08-11-2015 08:45 AM
dfw692
5.0L (1979-1995) Mustang
4
08-07-2015 11:53 PM



Quick Reply: Bama 93 Torque Tune - Holds Revs Too Long?



All times are GMT -5. The time now is 12:43 PM.