PLstang

Well after a few hectic weeks we have finally started the install on my new Kenne Bell 2.8L blower. We decided to go ahead and get the blower broke in and the car tuned with the blower prior to installing the new Monster Mod 5.4L shortblock from MMR. We decided since we would also be Porting and Polishing the heads while changing the cams to the stage 3 comp cams it might be wise to have a working tune with the new blower first!

Here are a couple pics of the install earlier today. We hope to be doing the motor and heads next week but it depends on how the tuning goes today and tomorrow.

Before:


During:

SikO7GT

Whoa mama that is nice!!

loots06

I thought you were going with the twins? Either way I'm sure you'll be very happy.

Rubrignitz

The PLStang chronicles. Keep em' coming. Never get tired of seeing your pics and upgrades man.

Post that **** over on LS1tech and watch em' squirm and cry. Heehee.

ryanralston07

This makes me smile ha so what are you power goals?

PLstang

Well once the new shortblock is in (did I mention it's good for 1500 to 2000 HP ). We're going to spray the KB....Looking for 900 rwhp. I'd settle with 850 though!

PLstang

LS1's....tasty little snack!!!

PLstang

Well we got a little more done this afternoon.

We had to order a new fitting for the fuel rail and have it overnighted (running out of room in there) and a new belt. I guess Kenne Bell didn't plan on me running an overdrive pulley with this blower!!

Anyways here is a couple of pic's!



(Hey finally got that thing to work!!!)

onederful100

that KB looks nice.
when do you expect the MMR motor?

PLstang

It shipped on Monday so maybe as early as tomorrow. We're going to put it in next week probably. We're porting and polishing the heads and installing some comp cams at the same time. Hope to have it done by the week after next.

We have an NMRA race coming up or I think we could have it done next week.