Nitrious Install
#2
if you buy the zex kit, you will spend about 1000.00 if you buy the racer kit with it (which I suggest). The zex kit is very easy to install so you could do it yourself, but if you are not comforatable doing it yourself it will cost around 500.00 for someone to install.
Last edited by 06elnr; 09-16-2008 at 11:09 AM.
#3
I chose to have it professionally installed as I wanted to make sure everything was wired correctly and working properly. Took it all back to a switch plate. Once you throw in the installation costs on top of the cost of the kit and extras plus guages to monitor it all you can be easily in the $1500 range.
Or you can do it yourself for under $750 but I wasnt going to take any chances and screw something up. Plus they did a really nice job that I never could have done myself.
Or you can do it yourself for under $750 but I wasnt going to take any chances and screw something up. Plus they did a really nice job that I never could have done myself.
#4
It's really not hard to install. I did mine as well as another person on here's. Takes about 2 hours to do if you know what you're doing. Outside of the basic kit, I would suggest the racer kit as well. If you linger the forums you might find someone selling parts which can save you a lot of money. For my entire kit plus add-ons I spent roughly 700.
#6
It's really not hard to install. I did mine as well as another person on here's. Takes about 2 hours to do if you know what you're doing. Outside of the basic kit, I would suggest the racer kit as well. If you linger the forums you might find someone selling parts which can save you a lot of money. For my entire kit plus add-ons I spent roughly 700.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-10-2015 08:39 PM