GT front end conversion
 

i know this thread was done before but with the change in the forums i cant find it. for the complete GT front end conversion what are the extra parts needed. i am purchasing the bumper and grill from newtakeoff.com. also i had another question. i have a pony package v6 mustang with the small fogs, do i still need to purchase the wiring kit for GT grill conversion?

Here are the parts you need:

First, Fender Liners:
one is the right one is left
5R3Z – 16103 – BA
5R3Z – 16102 – BA

The Radiator deflector shield, goes under the bumper and screws into a cross member underneath:
5R3Z – 17626 – BA

Screws:
You need these screws to attach the radiator deflector shield,
N801169 – S900
YOU WILL NEED 7 but i got 8 just to be safe!

Thread clips/nuts:
the screws go through the bumper into the deflector shield but there is no thread in the cross member so you need a clip to clip into the cross member and its threaded so it stays in place.
W705992 – S441
You need 3 of these

the other piece is the foam, i didn't buy one but i shaved off the top part that said V6. it saved me like 10 dollars but you have to shave it down if you don't buy the GT one



And thats all you need! But I dont know the answer to your fog lights question

the pony fog wires will work.

man if you were closer to FL i would offer to trade my painted black rockers for your flat black ones!