Notices
2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.
Sponsored by:
Sponsored by:

mid mounted m80s and tein drop...??

Thread Tools
 
Search this Thread
 
Old 12-10-2008, 11:12 PM
  #1  
rford426
4th Gear Member
Thread Starter
 
rford426's Avatar
 
Join Date: Nov 2007
Location: OK&TX
Posts: 1,904
Default mid mounted m80s and tein drop...??

Hey guys how bad do you think its gonn abe with my pypes m80s mid mounted with the new springs i just ordered? there the tein s with the 1.5 and 2.2 drop...think im gonna rip off my mufflers? i already scrap a lil over some stuf...
rford426 is offline  
Old 12-11-2008, 02:05 AM
  #2  
JMoraru
2nd Gear Member
 
JMoraru's Avatar
 
Join Date: Sep 2008
Location: Georgia
Posts: 172
Default

i dont think it will rip them off. i have M80s for a little and i was almost a low and didnt have issues.
JMoraru is offline  
Old 12-11-2008, 02:22 AM
  #3  
Texotic
5th Gear Member
 
Texotic's Avatar
 
Join Date: Aug 2007
Location: College Station, TX
Posts: 2,179
Default

I haven't heard of anyone going with the Tein springs yet. If you track it, let me know how they do.
Texotic is offline  
Old 12-11-2008, 09:17 AM
  #4  
degeze
5th Gear Member
 
degeze's Avatar
 
Join Date: Jun 2007
Location: Douglasville, GA
Posts: 2,126
Default

Originally Posted by Texotic
I haven't heard of anyone going with the Tein springs yet.
2007CalSpec is running Tein Springs...not sure which ones though.
I think the front will be ok, but not really sure about the back. Speed bumps may be a problem...I think you need to leave at least 3.5" to clear them.
degeze is offline  
Old 12-11-2008, 09:28 AM
  #5  
paydirt
2nd Gear Member
 
paydirt's Avatar
 
Join Date: May 2006
Location: San Antonio TX
Posts: 453
Default

I think caution also had the tein springs on his car...you might want to PM him
paydirt is offline  
Old 12-11-2008, 06:52 PM
  #6  
Johnny Venomous
1st Gear Member
 
Johnny Venomous's Avatar
 
Join Date: Jun 2007
Posts: 71
Wink

My car is lowered and I have no problems what so ever with my M-80's
Johnny Venomous is offline  
Old 12-11-2008, 09:08 PM
  #7  
kpaulhus
4th Gear Member
 
kpaulhus's Avatar
 
Join Date: Oct 2006
Location: Jax, FL
Posts: 1,554
Default

Originally Posted by degeze
2007CalSpec is running Tein Springs...not sure which ones though.
I think the front will be ok, but not really sure about the back. Speed bumps may be a problem...I think you need to leave at least 3.5" to clear them.
Ive got 3 1/4" with my center exhaust and I have to be careful but its not like you cant drive the car.
kpaulhus is offline  
Old 12-11-2008, 10:42 PM
  #8  
rford426
4th Gear Member
Thread Starter
 
rford426's Avatar
 
Join Date: Nov 2007
Location: OK&TX
Posts: 1,904
Default

^^ k thats what i like to hear but i already scrape them on my gfs drive way when i pull in now i have a big drop what do you suggest? i cant use ramps either its off a busy rode
rford426 is offline  
Old 12-11-2008, 11:11 PM
  #9  
mygt500
Multi-Tasking Moderator!
 
mygt500's Avatar
 
Join Date: Nov 2006
Location: Detroit Rock City!
Posts: 15,618
Default

Turn on a slow severe angle if the driveway is wide enough.....or park across the busy road and hoof it? .....plan out where you drive in advance too.... JMO
mygt500 is offline  
Old 12-11-2008, 11:14 PM
  #10  
rford426
4th Gear Member
Thread Starter
 
rford426's Avatar
 
Join Date: Nov 2007
Location: OK&TX
Posts: 1,904
Default

thanks guys wish me luck haha i really love my m80s
rford426 is offline  


Quick Reply: mid mounted m80s and tein drop...??



All times are GMT -5. The time now is 12:47 PM.