S197winstang

how long did it take for install?

2007CalSpec

As long as it takes to screw in a light bulb. lol Or in this case, just pull out the stock bulbs and plug these in.

firestang24

so, you have an aftermarket housing, with an always on (with the lights/blinkers on) little orange bulb, and the LEDs for forward lights? i think it's awesome, just the first picture is kinda dark. do you have LEDs for the rear marker lights as well?

2007CalSpec

That's correct. The amber bulb is a regular stealth bulb but I think I'm going to change it to an LED one.

I couldn't get a good shot of the LEDs because they were too bright so I had to turn up the shutter speed....Although the darkness lets you see the individual LEDs on the bulb. I do have LEDs for the rear markers.

nmd55

so these dont have problems with the blink speed like regular LEDs?

2007CalSpec

Luckily, no.

Bmr4life

Those are awesome. To bad I have to spend $100 on clear corners in addition to the $30 for the leds.

Jokeurmnd

I love your light set up. I always wanted to get the four halo lights

2007CalSpec

UPDATE: I just noticed hyper flashing while waiting to make a turn; coming home from work. Weird that it started happening now. Once I got home, I tried the turn signals again and of course it didn't hyper flash. I'm just going to install the 6 ohm resistors now.

PSUSkier

I gotta say, I'm not usually into gimmicky light things like this, but those look pretty slick.