SCT question
 

Long story short, have a SCT tuner I just got from Brenspeed, have yet to plug it in or anything. How do I read/clear a trouble code? Im 99% positive its the o2 sensor.

Don't know the answer but if you go to sctflash.com I'm sure you'll be able to find what you need. You're doing it on the stock tune right?

Uh...I think it's under Vehicle Info then Read/Clear DTC's. This is all coming out of my noggin, so not sure if it's exactly worded that way. Either way, you don't have many options with the tuner, so I'm sure you could figure it out ;)

You can play with the options till your hearts content, then decide to write the nvram code. Plug it in and play around with the options, then come back and ask. The code won't clear if you have the rear 02's disabled.