Smoothest idling, best power producing cams for 4.6 3V
#21
I wouldn't say there was anything "wrong" with them but my driving environment (heavy traffic, stop and go, all the time) here in austin just isn't suited to the lumpy idle. I was having to give it rpm, then ride off the clutch hoping someone didn't pull over into my lane which folks here will do if you have 1/2 car length in front of you! Once I was off the clutch I would have to yank it out of gear so it didn't buck when traffic slowed again. And the 4.10 gears just exascerbated it. The stock cams with smoother idle, I can release the clutch from idle w/o bucking or stalling in traffic. It just makes my life much, much better .
I have a similar driving environment since I travel mopac all the way from South Austin to North then onto 183 for a bit. Hopefully since I have an auto, it'll be a little better. We'll see!
#22
I'll takes me some of that NHRA top fuel sputtering.
I really like the sound of those SPRs though. Stage 2 or 3.
#23
I'm definitely going to wait and investigate blower/cam combos. It's about damn time I boosted this car. I can't sell it w/o seeing it blown and there's really no bolt-on's other than udp's and delete plates which I refuse to do...just don't see the point for <10whp. Cams, heads and blower I'll want to match...IF I even go there. Just plopping a centri s/c and putting down 400+ EMISSIONS legal whp sounds really good to me about now.
I did get 25.2 avg mpg around town today with the stock cams. I was lucky to get 18mpg with the hot rods!!! I forgot what decent gas mileage was...
I did get 25.2 avg mpg around town today with the stock cams. I was lucky to get 18mpg with the hot rods!!! I forgot what decent gas mileage was...
#24
He sent me some idle vids... these are w/o a doubt the cams you want in an N/A application.
Last edited by Rubrignitz; 10-07-2009 at 08:06 PM.
#25
Yeah, yeah, buy I Honda Civic, I know....I want to have my cake and eat it too, especially since other people apparently can.
Thread
Thread Starter
Forum
Replies
Last Post
uberstang1
Classic Mustangs (Tech)
6
09-20-2015 06:42 PM