metlcub

Hey all
I been looking but I can not find the how to or anything.

I was driving down the road and a silver GT mustang pulled p next to me and asked if I wanted to swap my V6 spoiler for his GT. He's going for the GT500KR look so he's been after the V6 and well I like the GT one better.

I saw the How to to remove the GT spoiler but I have not been able to find one for the V6. how much adhesive in under the V6, or is it basicly the same as the GT.

Thanks

Deadbeat

I removed my v6 wing a few months back. There's A LOT of adhesive under that ****. It took me a good 20-30 minutes just to saw through it (Didn't have fishing line to cut through properly). Also, I didn't have an extension coord so I couldnt even use a heat gun on it (I live in an apartment complex).

Basically, if you have all the right tools, you'll be fine. Tools to unbold the spoiler, a heating gun and maybe some fishing line to saw through the adhesive tape.

The EASIEST part was putting the stock GT spoiler on. The holes line up EXACTLY as they should.

Good luck and post some pics when done!