When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Different fascias like the Roush or Steeda are nice but this just provides a cheaper alternative to make the stock GT fascia look a little more appealing
Originally Posted by Blair
I think it would look good as long as it covered up the small paint strip on the bottom under the opening and got rid of the unpainted "mutton chops" on the side of the front bumper.
If the paint strip and side "mutton chops" were removed there wouldn't be anything to mount to. Both those or some sort of alternative would need to be there to mount to and provide a little height in the fascia. The splitter would simply complement those parts and make them flow a little better.
Originally Posted by 2010V6Stang
You should make one for the V6
One for the V6 may follow the GT fascia depending on the interest
Last edited by david01130; 02-07-2010 at 11:32 AM.
They would be hollow underneath similar to all other splitters such as the GT500, Roush, etc. Depending on the interest I see here and other places it could be about 6-8 weeks.
I think it would look good as long as it covered up the small paint strip on the bottom under the opening and got rid of the unpainted "mutton chops" on the side of the front bumper.
^What he said, v8's allready have the cdc&steeda offerings, frpp california spec should be out soon and vaughn gitten jr's RTR chin should also be out soon. But nothing for the 4.0's