Help with rear bumper cover
#1
Help with rear bumper cover
Hey all,
New to the forums, but you all seem a knowledgeable crowd, so I was hoping maybe someone could help me. Forgive me if this is in a thread somewhere here, I did run a search for rear bumper cover issues but didn't seem to be able to find what I was looking for.
Long story short, Mustang took a little spill and some portions of the body near the wheel wells were cracked in the rear. They are the piece that the rear bumper cover screws to, the black piece in the picture behind the pulled back cover.
Pic here > http://i42.tinypic.com/2ivv43.jpg
I was wondering if anyone knew if there's a place where I could purchase replacements (left & right) for these? Would Ford be my best bet or can these be had anywhere else?
Thanks much for any thoughts!
Dan
New to the forums, but you all seem a knowledgeable crowd, so I was hoping maybe someone could help me. Forgive me if this is in a thread somewhere here, I did run a search for rear bumper cover issues but didn't seem to be able to find what I was looking for.
Long story short, Mustang took a little spill and some portions of the body near the wheel wells were cracked in the rear. They are the piece that the rear bumper cover screws to, the black piece in the picture behind the pulled back cover.
Pic here > http://i42.tinypic.com/2ivv43.jpg
I was wondering if anyone knew if there's a place where I could purchase replacements (left & right) for these? Would Ford be my best bet or can these be had anywhere else?
Thanks much for any thoughts!
Dan
#3
Well that's all one part it wraps all the way around the back and is held on with 4 nuts you get to in the trunk. And it's held to the bumper cover with rivets. I'm sure you can get it at ford. Just explaine to them it's the part that attaches to the bumper cover on the inside
Thread
Thread Starter
Forum
Replies
Last Post
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
09-09-2015 01:21 AM