bolivianpimp

Well guys we installed the Saleen blower on the car a week ago and I still have to install the pumps and gauges. I purchased the pumps from someone on the forums, but the harness was definitely not complete and missing some connectors. I was using 1eyedwilly’s write up on mustangforums.com https://mustangforums.com/forum/2005...-pictures.html as well as the FFRP manual. When looking at the diagram on *****’s write up (on post #2 about the 5th pic down on that post), I can see that mine looks nothing like his!! I really need your help to identify what else I need to complete the harness and finally be able to get my car tuned and running . I know for sure one plug we were missing was the one that connects directly on top of the GT500 pumps, I ordered that part from Ford and it will arrive today. I have provided some pictures so you can see what my harness looks like.
I posted the pictures in order from whole harness -> relay side of harness-> all way to other end of harness. If you know which connectors im missing, please let me know if there is a part number on it or if you know a specific name to order it!
Thanks for all the help!!!!

bolivianpimp

One more picture of one side of the harness, opposite to the relay side. This end was cut off and has 2 wires.

white_lightning

I bought my gt500 pump brand new and the wiring was effed!

I'm not sure If you have the same concern but I followed the thread below, and then everything made sense. There are a number of guys that have installed whipples, eforces and saleen that seem to have encountered wonky wiring from ford racing on this component. Hopefully this threa helps

https://mustangforums.com/forum/2005...snt-match.html