My Afternoon Project - Used GTAs
06-26-2010, 01:09 PM
#1
1st Gear Member
Thread Starter
Join Date: Oct 2009
Location: PA
Posts: 76
My Afternoon Project - Used GTAs
Picked up a set of used GTA axle-backs through the forum. They are a bit rusty and needed a weld on one of the hangers. Got the weld done this morning.
Scraped a bunch of the surface rust off. Coated them in high-temp black paint. About to go put the second coat on. When that dries, I'll polish up the tips and install them. I'll post pics and video later today.
Video added a couple of posts down...
Scraped a bunch of the surface rust off. Coated them in high-temp black paint. About to go put the second coat on. When that dries, I'll polish up the tips and install them. I'll post pics and video later today.
Video added a couple of posts down...
Last edited by mtyson227; 06-27-2010 at 12:51 PM. Reason: Letting people know a video was added...
06-26-2010, 09:33 PM
#4
1st Gear Member
Join Date: Aug 2009
Location: Alberta
Posts: 71
I juts picked up a pair of virtually new GTAs for a good price and their installed. Sound really great. Nice deep and little louder idle. Nice rumble when decelerating. And no drone. They are great if you want something a little louder than stock.
06-27-2010, 12:25 AM
#5
1st Gear Member
Thread Starter
Join Date: Oct 2009
Location: PA
Posts: 76
I created a little video of my efforts today. If you are a Rush fan...you'll want to watch through the end.
http://www.youtube.com/watch?v=AKJF2RWwG2s
http://www.youtube.com/watch?v=AKJF2RWwG2s
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
1
01-21-2016 01:30 PM
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
maestro1024
Classic Mustangs (Tech)
6
09-21-2015 02:40 PM
