Question about Brenspeed's Stage 2 Power Pack
09-10-2010, 04:56 PM
#1
2nd Gear Member
Thread Starter
Join Date: Mar 2010
Location: FL
Posts: 316
Question about Brenspeed's Stage 2 Power Pack
Brenspeed claims their Stage 2 Power Pack (Steeda CAI, x-3 tuner, Kooks 1 3/4" headers, 3"mid-pipe, catted X or H pipe, Steeda {Borla} axle-back) adds 72+ HP. It costs $2649.00.
My questions are: is this HP claim feasable with this hardware, and is that a fair price for whar you get?
Here's the link to their info: http://www.brenspeed.com/coyotestage2a.html
I'll be grateful for any input you guys can give me.
My questions are: is this HP claim feasable with this hardware, and is that a fair price for whar you get?
Here's the link to their info: http://www.brenspeed.com/coyotestage2a.html
I'll be grateful for any input you guys can give me.
09-10-2010, 05:51 PM
#2
5th Gear Member
Join Date: Mar 2007
Location: Elizabeth City N.C.
Posts: 2,790
The coyote platform has already proven itself to make exceptional power gains from just minor bolt ons, and a tune. Many tuners have shown, and backed up some amazing results so far. So I say that this claim is totally reasonable. Also I would believe any claims made by Brenspeed, over that of most any other tuner. They have to good a reputation to uphold.
As far as the price goes, well I can't answer that, but they usually offer some of the best prices around. They have always price matched any of the competitors, in the few circumstances where I found it cheaper.
Let us know how it works if you end up getting it.
As far as the price goes, well I can't answer that, but they usually offer some of the best prices around. They have always price matched any of the competitors, in the few circumstances where I found it cheaper.
Let us know how it works if you end up getting it.
09-10-2010, 07:42 PM
#3
6th Gear Member
If that price included the LT install it wouldn't be bad but when you price the individual components I think it sounds a bit pricey. As far as the advertised gains, your guess is as good as mine. Could be crank HP, could be RWHP, but it sounds a good bit high IMO but maybe that's possible on the 5.0.
If it were me, I'd add cams to that list since the gain from the LT's are magnified with cams. Maybe with the cams tossed in I'd expect to get close to those numbers. Remember: you're looking at a package for the 5.0, NOT for your 4.6L.
If it were me, I'd add cams to that list since the gain from the LT's are magnified with cams. Maybe with the cams tossed in I'd expect to get close to those numbers. Remember: you're looking at a package for the 5.0, NOT for your 4.6L.
Last edited by Nuke; 09-10-2010 at 07:45 PM.
09-12-2010, 02:22 AM
#4
2nd Gear Member
Join Date: Apr 2008
Location: Maryland
Posts: 391
The coyote platform has already proven itself to make exceptional power gains from just minor bolt ons, and a tune. Many tuners have shown, and backed up some amazing results so far. So I say that this claim is totally reasonable. Also I would believe any claims made by Brenspeed, over that of most any other tuner. They have to good a reputation to uphold.
As far as the price goes, well I can't answer that, but they usually offer some of the best prices around. They have always price matched any of the competitors, in the few circumstances where I found it cheaper.
Let us know how it works if you end up getting it.
As far as the price goes, well I can't answer that, but they usually offer some of the best prices around. They have always price matched any of the competitors, in the few circumstances where I found it cheaper.
Let us know how it works if you end up getting it.
Also brenspeeds site in general always talks about crank horsepower not rear wheel horsepower which is often misleading to people that don't know any better.
Last edited by Analyzer52; 09-12-2010 at 02:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post
