Anybody with a Harness Bar??
11-22-2010, 09:24 PM
#1
2nd Gear Member
Thread Starter
Join Date: Sep 2009
Location: arkansas
Posts: 224
Anybody with a Harness Bar??
I need to put at least a harness bar in my car but dont really wont to modify anything, anyone know if these harness bars require any cutting to install. its just a one time deal, looking to run the BBORR this coming year.
http://www.latemodelrestoration.com/...au-Harness-Bar
http://www.latemodelrestoration.com/...au-Harness-Bar
11-22-2010, 09:34 PM
#2
5th Gear Member
Join Date: Oct 2008
Location: CA
Posts: 2,073
Based on what I saw of the customer pic on that page (as well as when I had the interior of my car dismantled for sound mat install), It looks to me like they are utilizing the seat belt attachment points at the top and bottom. So other than needing a star bit that fits the seat belt bolts and a torque wrench to make sure you tighten the bolts back up to spec, it should be good.
11-22-2010, 09:54 PM
#3
6th Gear Member
Join Date: Jul 2008
Location: Acworth, GA
Posts: 12,260
Based on what I saw of the customer pic on that page (as well as when I had the interior of my car dismantled for sound mat install), It looks to me like they are utilizing the seat belt attachment points at the top and bottom. So other than needing a star bit that fits the seat belt bolts and a torque wrench to make sure you tighten the bolts back up to spec, it should be good.
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
