When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
If your talking about 500 HP at the crank you'll need cams, headers, 2.57 pulley kit, KB boost a pump and an aluminum driveshaft wouldn't hurt. Basically another 2 grand to get there.
If your talking about 500 HP at the crank you'll need cams, headers, 2.57 pulley kit, KB boost a pump and an aluminum driveshaft wouldn't hurt. Basically another 2 grand to get there.
Did you mean at the wheels? Don't think a driveshaft will help much with crank hp .
If your talking about 500 HP at the crank you'll need cams, headers, 2.57 pulley kit, KB boost a pump and an aluminum driveshaft wouldn't hurt. Basically another 2 grand to get there.
He's got to be talking about at the wheels as a stage 3 roush has 540hp bone stock.
Call JDM or VMP. They have got several stage 3 owners in the 600+ range. You've got a forged shortblock so it's basically up the boost and retune. At that power a dyno tune is a good idea but some will debate that.
If your talking about 500 HP at the crank you'll need cams, headers, 2.57 pulley kit, KB boost a pump and an aluminum driveshaft wouldn't hurt. Basically another 2 grand to get there.
These are the things i was looking for but can any one make recommendations for each of these.
It's an 07 so its 415 to the crank, right now. All the performance upgrades are just those of an 07 stage 3