Ford Hot rod cams, daily drivable?
06-10-2011, 01:33 PM
#14
The Paranoid One
Join Date: Apr 2006
Location: Texas
Posts: 5,320
Before those mods I had CAI and UDP's and a tune from a different place.
The UDP's were removed before the cams were put in though.
The dyno was done at the same place though before and after the cam install and tune they gave me. Tune differences on these cars can make a BIG difference!
The UDP's were removed before the cams were put in though.
The dyno was done at the same place though before and after the cam install and tune they gave me. Tune differences on these cars can make a BIG difference!
06-10-2011, 01:45 PM
#15
5th Gear Member
Join Date: Mar 2006
Location: ATL
Posts: 2,955
Before those mods I had CAI and UDP's and a tune from a different place.
The UDP's were removed before the cams were put in though.
The dyno was done at the same place though before and after the cam install and tune they gave me. Tune differences on these cars can make a BIG difference!
The UDP's were removed before the cams were put in though.
The dyno was done at the same place though before and after the cam install and tune they gave me. Tune differences on these cars can make a BIG difference!
06-10-2011, 01:54 PM
#16
The Paranoid One
Join Date: Apr 2006
Location: Texas
Posts: 5,320
Yes it was my peak.
But I loss no low end either.
If the cams caused me to lose any low end it was minimal and again the new tune made up for it and the end result
was no loss in low end and an actual gain.
That's my point. The loss of trq with these cams is so minimal that a good tune can make make up for it.
But I loss no low end either.
If the cams caused me to lose any low end it was minimal and again the new tune made up for it and the end result
was no loss in low end and an actual gain.
That's my point. The loss of trq with these cams is so minimal that a good tune can make make up for it.
Last edited by Blacksmoke; 06-10-2011 at 01:56 PM.
