When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm guessing that someone chrome plated their fan-blades. I'm not much for the work, but in any case they were never put on the road stock like that. At least certainly not to my knowledge
Location: PA to KY ('07) to IL ('09) to MS ('10) to FL ('11)
Posts: 16,182
Originally Posted by pdonket
I'm guessing that someone chrome plated their fan-blades. I'm not much for the work, but in any case they were never put on the road stock like that. At least certainly not to my knowledge
...which is the exact reason that I stated above that I thought they were aftermarket.
+1
AND, if those were originally OE wheels, they're 8.5" wide which would prevent you from putting tires sufficeintly wide to support the power from your SC.
AND, if those were originally OE wheels, they're 8.5" wide which would prevent you from putting tires sufficeintly wide to support the power from your SC.
That's what I was thinking...that and they ugly. Never was a fan of the "fanblade"
Like the chrome cobra R's waaaaaaaaaaay better myself
Location: PA to KY ('07) to IL ('09) to MS ('10) to FL ('11)
Posts: 16,182
The OE fanblades wouldn't be half-bad if they were more of a deep-dish design or at least set in an inch or so. Those blades being flush to the outer edge of the rim = FAIL, IMO