Watch XPEL Ultimate Clear Bra Self Heal On Video
10-01-2011, 10:32 AM
#13
Former Sponsor
Thread Starter
Join Date: Jun 2011
Location: Texas
Posts: 60
10-01-2011, 11:14 AM
#14
Join Date: Oct 2010
Location: TX
Posts: 44
Impressive!
I do have a question. If the car already have a few rock chips, how noticeable are the chips once the film is applied? Even when the chips are touched up, they are usually not completely level with the undamaged paint. I would like to know if I'm going to make the rock chips even more noticeable...
FC
I do have a question. If the car already have a few rock chips, how noticeable are the chips once the film is applied? Even when the chips are touched up, they are usually not completely level with the undamaged paint. I would like to know if I'm going to make the rock chips even more noticeable...
FC
10-01-2011, 05:03 PM
#16
The Paranoid One
Join Date: Apr 2006
Location: Texas
Posts: 5,320
Could you cut holes in this to fit a car with hood pins?
Or do you have any that have holes cut out to fit hoods with pins?
That sure would protect against the scratches the wires on the hood pins
leave!
Or do you have any that have holes cut out to fit hoods with pins?
That sure would protect against the scratches the wires on the hood pins
leave!
10-05-2011, 08:17 AM
#17
Former Sponsor
Thread Starter
Join Date: Jun 2011
Location: Texas
Posts: 60
Appearance...
Impressive!
I do have a question. If the car already have a few rock chips, how noticeable are the chips once the film is applied? Even when the chips are touched up, they are usually not completely level with the undamaged paint. I would like to know if I'm going to make the rock chips even more noticeable...
FC
I do have a question. If the car already have a few rock chips, how noticeable are the chips once the film is applied? Even when the chips are touched up, they are usually not completely level with the undamaged paint. I would like to know if I'm going to make the rock chips even more noticeable...
FC
10-05-2011, 08:21 AM
#18
Former Sponsor
Thread Starter
Join Date: Jun 2011
Location: Texas
Posts: 60
The holes could be cut out for hood pins. I would contact a local installer to do the job right.
10-05-2011, 11:10 AM
#19
Love your product....I recently bought my wife a 2012 Toyota Sienna SE Van and had the local guy do the entire front bumper, entire hood, front plastic chrome grill, front fenders, headlights, foglights, mirrors & all the door handle cups. This is apparently the new film that does not have any orange peel in it....it's slick!
The Xpel film I put on my mustangs actually had the orange peel in it and definitely saved the front end from all the crap the comes at it.....every vehicle I own will have your product on it. Well worth the money!
Main thing - make sure to have an installer that knows what he/she is doing! Trust me!
The Xpel film I put on my mustangs actually had the orange peel in it and definitely saved the front end from all the crap the comes at it.....every vehicle I own will have your product on it. Well worth the money!
Main thing - make sure to have an installer that knows what he/she is doing! Trust me!
