Notices
2005-2014 Mustangs Discussions on the latest S197 model Mustangs from Ford.
Sponsored by:
Sponsored by:

Does anyone

Thread Tools
 
Search this Thread
 
Old 11-07-2011, 07:24 PM
  #1  
James07GT
Thread Starter
 
James07GT's Avatar
 
Join Date: Sep 2010
Location: North Carolina
Posts: 41
Default Does anyone

here have a scanguage ll. I got one for my 07 GT. I set the hp adjustment to 15% and did a quick run. It said i had 305 hp. Just wondering if anyone here had similar results.
James07GT is offline  
Old 11-07-2011, 07:44 PM
  #2  
simplexdesign
4th Gear Member
 
simplexdesign's Avatar
 
Join Date: Oct 2007
Location: FL
Posts: 1,533
Default

Never heard of.
simplexdesign is offline  
Old 11-07-2011, 09:22 PM
  #3  
James07GT
Thread Starter
 
James07GT's Avatar
 
Join Date: Sep 2010
Location: North Carolina
Posts: 41
Default

http://www.scangauge.com/products/scangaugeii/
basically tells you alot about your car
James07GT is offline  
Old 11-07-2011, 09:35 PM
  #4  
2005Redfire6
6th Gear Member
 
2005Redfire6's Avatar
 
Join Date: Jul 2008
Location: Acworth, GA
Posts: 12,260
Default

I have one but have never messed with the HP thing on it, figured it would be inaccurate as hell. I mainly use it for IATs, Water temp, ect...
2005Redfire6 is offline  
Old 11-08-2011, 12:06 AM
  #5  
bloodybobber
 
bloodybobber's Avatar
 
Join Date: Jul 2008
Location: Florida
Posts: 37
Default

I have one but it is an older version, 3 years old , and it doesn't have the all the tricks of the latest. I see it can be upgraded for $25 to give 0-60, 1/4 mile and other performance data.
bloodybobber is offline  
Old 11-08-2011, 12:23 AM
  #6  
simplexdesign
4th Gear Member
 
simplexdesign's Avatar
 
Join Date: Oct 2007
Location: FL
Posts: 1,533
Default

I wonder if these are accurate. I mean I highly doubt it or dyno runs would be useless besides seeing the rpm power band.
simplexdesign is offline  
Old 11-08-2011, 09:53 AM
  #7  
James07GT
Thread Starter
 
James07GT's Avatar
 
Join Date: Sep 2010
Location: North Carolina
Posts: 41
Default

The scangauge 2 measures bhp. To get rear wheel you would need a dyno to compare the numbers from the scanguage2 to the dyno. However far off the scanguage 2 is compared to the dyno is the adjustment you would make to the the scanguage 2 in the percentage. I dont have a dyno so I used the 15-20% which is around how much hp is lost to the powertrain. Havent tested the 0-60 or 1/4 times yet.
James07GT is offline  




All times are GMT -5. The time now is 11:49 PM.