Something is missing at the end of the Windshield Wiper Arm
11-15-2011, 12:37 AM
#1
1st Gear Member
Thread Starter
Join Date: Oct 2011
Location: Florida
Posts: 66
Something is missing at the end of the Windshield Wiper Arm
There is something missing at the end of the Windshield Arm for the 2012 Mustang GT. Looks like there was supposed to be some sort of plastic O-ring/fastener.
If anyone knows where to get this O-Ring fastener please let me know. I don't believe ford carries them.
Thanks.
If anyone knows where to get this O-Ring fastener please let me know. I don't believe ford carries them.
Thanks.
Last edited by Mustang Enthusiast; 11-20-2011 at 07:52 PM. Reason: Originally could not get photobucket to transfer the image.
11-17-2011, 12:21 AM
#4
1st Gear Member
Thread Starter
Join Date: Oct 2011
Location: Florida
Posts: 66
Can anyone tell me if an O-ring/clip from an earlier model Mustang will/might fit here. If so, please tell me the year of your Mustang. Ford obviously didn't want to spend the extra 10 cents to put in the plastic part on the 11/12 Mustangs. Thanks for any info.
Last edited by Mustang Enthusiast; 11-17-2011 at 01:37 AM.
11-20-2011, 08:00 PM
#6
1st Gear Member
Thread Starter
Join Date: Oct 2011
Location: Florida
Posts: 66
It's strange looking. Most of the cars I have owned have/had small drain holes for water to drain thru. This looks just like a clip would fit there (because of the cuts in the plastic) and still allow water to drain thru. I saw a video on Youtube with an earlier model Mustang that had the plastic O-ring. I guess I'm not used to this type of design. Thanks for the info.
Thread
Thread Starter
Forum
Replies
Last Post
Dragonus18
4.6L (1996-2004 Modular) Mustang
8
09-09-2015 01:21 AM
