steeda cai
#1
steeda cai
INSTALLED!
however....the previous owner of my car seemed to have had a cai, then replaced the stock airbox and didnt put those rubber grommets back. Any recommendations for replacements?
Im not above going to a lowes or similar and going Frankenstein on some rubber to craft one just need some dimensions/pic etc etc.
Also I have to fab up a bracket to anchor the heat shield down, bought the CAI used and it was conspicuously absent. Dimensions on it would also be very helpful
however....the previous owner of my car seemed to have had a cai, then replaced the stock airbox and didnt put those rubber grommets back. Any recommendations for replacements?
Im not above going to a lowes or similar and going Frankenstein on some rubber to craft one just need some dimensions/pic etc etc.
Also I have to fab up a bracket to anchor the heat shield down, bought the CAI used and it was conspicuously absent. Dimensions on it would also be very helpful
#3
Can anyone measure the diameter of the bolt that holds the abs distribution block to its bracket?
Im making my own while im at work and have the tools to do it. Want to make sure i have enough space to go around the bolt.
Thanks
Im making my own while im at work and have the tools to do it. Want to make sure i have enough space to go around the bolt.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
mungodrums
S550 2015-2023 Mustang
10
09-28-2015 10:54 PM
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
tj@steeda
Steeda Autosports
0
09-24-2015 09:18 PM