boost gauge on supercharger
 

today a friend installed me on my dash the 3 pod socket with air fuel, boost and volt gage, little probleme with the boost gage is that to plug it into the good tube in the supercharger i need a T style little plastic piece which I have no idea where to get...i can put it in another tube/ose but the reading is not correct, the good place require what im seeking for, anyone experienced this and used something in partciular accessible somewhere? same story for the air fuel ratio gage, i got it given by my uncle, but it was missing the sensor from the oxygen sensor, at least he plugged everything light work etc, but no reading on both gauge, im guessing i can get the oxygen sensor from any auto meter vendor...!

lets me know any information! thanks again:)!

i got mine from a knechts auto part store, it has a black
rubber boot for the boost gauge tubing.

Should be able to find what you need at any autoparts store, or even a home depot or general hardware store.

Lowe's, in the plumbing section. We sell all kinds of hose fittings whether they are copper, pvc w/e (i work at lowes)

I got the little t fitting at autozone. I used shrink tubing after pushing the t fitting into place.

Great! Thanks

Yup, that's where I got mine.

You need to re-size your sig bro... a lot. You're about a thousand times over the forum limit.

Wow just saw, will do when i get
Home, i though it told upload failed yesterday