mustangfan305

hey wanted to ask you guys if anybody has had a problem with there driver side window like i am or something similar to it. when i bought my mustang a while back i noticed that when the door was closed the window had a inch or inch in a half gap from being completly to the top of the window seal. but no water or anything would get in. just this week the window switch for the driver door wouldn't automaticly go up when you hit it and i thought that was strange and today when you have the window fully up and close the door when your leaving the car it wont go up all the time. i think its the motor but i wanted to know what you think it could be?

So_Cali

I've had this issue before. Just hold the window switch up (As if you were to be closing the window) for about 10 seconds then check to see if you still have the same issue. I know I saw this trick here on the forum somewhere. Good luck

Nuke

Try the window recalibration procedure described in the OM. If it's not a calibration issue, then you'll be closer to suspecting the motor.