2006 gt 4.6 stumble in 1st gear. HELP!!
#1
2006 gt 4.6 stumble in 1st gear. HELP!!
Hi, I have a 2006 GT 4.6 5speed 355 gear. My engine has a full Mac exhaust, GT500 throttle body, cold air intake, power pullys, Detroit rocker cams, I bought the car like this and it runs and sounds great! I have never until recently ran it from a dead stop, when I nail it from a dead stop it has a bad cut out then right back on, hall *** after that with no misses in any other gear? The fuel pumps have been replace, I have part numbers I will post later, though it might be a fuel problem? I called the mustang shop that in stalled the cams and they think its because I need at least 373 to 411 gears. I just don't think that's it, when it hesitates the engine light flashes on and off? Im an old school hot rodder and if I could I would switch it over to a distributor and carb!! I love the unreal power this little 4.6 puts out but need help with the bad stumble, I do have a controller of some kind that came with the car, I will post its name brand and model later when I get home. Thanks for any help!!!!
#5
It's the button next to the chick magnet.
Okay sorry I couldn't resist, I don't know the answer to your original question, but the traction control is the button that says "TCS" on the dashboard next to the hazard lights.
Okay sorry I couldn't resist, I don't know the answer to your original question, but the traction control is the button that says "TCS" on the dashboard next to the hazard lights.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
BeatnikFink
New Member Area
6
10-01-2015 08:00 PM